Energy-Based Design Criterion of Dissipative Bracing Systems for the Seismic Retrofit of Frame Structures

Energy-Based Design Criterion of Dissipative Bracing Systems for the Seismic Retrofit of Frame Structures

Direct sizing criteria represent useful tools in the design of dissipative bracing systems for the advanced seismic protection of existing frame structures, especially when incorporated dampers feature a markedly non-linear behaviour. An energy-based procedure is proposed herein to this aim, focusin...

Full description

Bibliographic Details
Main Author:	Gloria Terenzi
Format:	Article
Language:	English
Published:	MDPI AG 2018-02-01
Series:	Applied Sciences
Subjects:	energy dissipation dissipative braces design criteria seismic retrofit frame structures
Online Access:	http://www.mdpi.com/2076-3417/8/2/268

Similar Items

Seismic Behavior of Concrete Columns Retrofitted with a Brace-Type Replaceable Steel Link
by: Min Sook Kim, et al.
Published: (2023-01-01)

Design of Additional Dissipative Structures for Seismic Retrofitting of Existing Buildings
by: Alessandro Vittorio Bergami
Published: (2024-03-01)

Seismic Upgrade of Steel Frame Buildings by Using Damped Braces
by: Eleonora Bruschi, et al.
Published: (2023-02-01)

Structural Performance of Single and Double-Section CBF Braces with Different Lengths Under Cyclic Loading
by: Panjaitan Arief, et al.
Published: (2024-01-01)

Dynamic response of RC frames retrofitted with friction-damped brace system through shaking table tests
by: Hye-Min Shin, et al.
Published: (2024-07-01)

Retrofitting of Imperfect Halved Dovetail Carpentry Joints for Increased Seismic Resistance
by: Miloš Drdácký, et al.
Published: (2019-02-01)

Experimental estimation of energy dissipated by multistorey post-tensioned timber framed buildings with anti-seismic dissipative devices
by: Felice Carlo Ponzo, et al.
Published: (2021-12-01)

On the effect of the near field records on the steel braced frames equipped with energy dissipating devices
by: Mahmoud Bayat, et al.

Seismic Performance of Iwf Flexural Link in Chevron Eccentrically Brace Frames (V-EBFs) with Different Stiffener Space
by: Imran Muhammad, et al.
Published: (2024-01-01)

A Dissipating Frames for Seismic Retrofitting and Building Energy-Efficiency
by: Dora Foti, et al.
Published: (2020-09-01)

Seismic Retrofitting of Steel Frames with Buckling Restrained Braces
by: Javad Vaseghi Amiri, et al.
Published: (2013-01-01)

Analysis of the steel braced frames equipped with ADAS devices under the far field records
by: Mahmoud Bayat, et al.

Optimizing Seismic Capacity of Existing Masonry Buildings by Retrofitting Timber Floors: Wood-Based Solutions as a Dissipative Alternative to Rigid Concrete Diaphragms
by: Michele Mirra, et al.
Published: (2021-12-01)

Experimental and Numerical Investigation of a Dissipative Connection for the Seismic Retrofit of Precast RC Industrial Sheds
by: Virginio Quaglini, et al.
Published: (2022-01-01)

Design and Seismic Performance of Tied Braced Frames
by: Tianjiao Jin, et al.
Published: (2023-06-01)

Seismic design of low-rise steel building frames with self-centering hybrid damping connections
by: Junlin Li, et al.
Published: (2022-06-01)

Seismic Performance of Eccentrical Braced Frame Retrofitted by Box Damper in Vertical Links
by: Fei Miao, et al.
Published: (2022-09-01)

Seismic fragility assessment of reinforced concrete moment frames retrofitted with strongback braced system
by: Mojtaba Gorji Azandariani, et al.
Published: (2023-12-01)

Seismic response of high strength steel frames equipped with energy dissipation bays subjected to seismic sequences
by: Fuming Wang, et al.
Published: (2024-07-01)

An Alternative Approach for the Design of Chevron-Braced Frames
by: Francesca Barbagallo, et al.
Published: (2021-11-01)

Redundancy Factors for the Seismic Design of Ductile Reinforced Concrete Chevron Braced Frames
by: Eber Alberto Godínez-Domínguez, et al.

Vibration-Reduction Strategy for High-Rise Braced Frame Using Viscoelastic-Yielding Compounded BRB
by: Xiangzi Zhou, et al.
Published: (2022-08-01)

Shaking-Table Test and Finite Element Simulation of a Novel Friction Energy-Dissipating Braced Frame
by: Lijuan Yan, et al.
Published: (2024-02-01)

Numerical Investigation of the Seismic Performance of Steel Frames with Energy-Dissipating Composite Walls
by: Ding Wei, et al.
Published: (2022-01-01)

Evaluation of Seismic Performance of Reinforced Concrete Frames Retrofitted with Buckling-Restrained Brace Under Near-Fault Earthquakes
by: Mohammad Reza Valipour, et al.
Published: (2017-08-01)

Effects of Dissipative Systems on the Seismic Behavior of Irregular Buildings—Two Case Studies
by: Marco Miani, et al.
Published: (2020-11-01)

Seismic energy dissipation study of linear fluid viscous dampers in steel structure design
by: A. Ras, et al.
Published: (2016-09-01)

Seismic Retrofit of Hospitals by Means of Hysteretic Braces: Influence on Acceleration-Sensitive Non-structural Components
by: Emanuele Gandelli, et al.
Published: (2019-08-01)

Seismic Evaluation of Steel Moment Frames Rehabilitated with CBF, EBF and BRBF Braced Systems
by: Morteza Raissi Dehkordi, et al.
Published: (2017-01-01)

Seismic Retrofit of Warehouses with Masonry Infills and Glazed Curtain Walls through Hysteretic Braces: Refinement of the Italian Building Code Provisions
by: Emanuele Gandelli, et al.
Published: (2023-07-01)

Editorial: Energy Dissipation Systems and Seismic Fuses
by: Farhad Behnamfar
Published: (2022-01-01)

Stiffening effects-controlling sizing procedure of ADAS dampers in seismic retrofit of frame structures
by: Gloria Terenzi, et al.
Published: (2023-01-01)

Using bracing systems to improve the seismic performance of moment resisting frame
by: Yasser A Gamal
Published: (2022-07-01)

A State-of-the-Art Review of Passive Energy Dissipation Systems in Steel Braces
by: Magdalini D. Titirla
Published: (2023-03-01)

Comparison of the performance of the structure with a Chevron braced frame with Zipper braced frame
by: Elham Pakbaz, et al.
Published: (2020-06-01)

Utilizing Steel Brace for Seismic Retrofitting of Old School Buildings with Open Ground Storey
by: T. Sharaf, et al.
Published: (2019-12-01)

Evaluation of the Seismic Retrofitting of Mainshock-Damaged Reinforced Concrete Frame Structure Using Steel Braces with Soft Steel Dampers
by: Fujian Yang, et al.
Published: (2021-01-01)

PROTOTYPE TESTING OF A NEW PASSIVE ENERGY DISSIPATION DEVICE FOR SEISMIC RETROFIT OF BRIDGES
by: Nefize Shaban, et al.
Published: (2016-09-01)

Evolution of EC8 Seismic Design Rules for X Concentric Bracings
by: Alessia Campiche, et al.
Published: (2020-10-01)

Optimum Location And Bracing System As Alternative To Shear Walls For Retrofitting Of RC Buildings Against Seismic Loading
by: Hogr Z. Hassan, et al.
Published: (2023-06-01)