High-pressure densification and hydrophobic coating for enhancing the mechanical properties and dimensional stability of soft poplar wood boards
Abstract Effects of high-pressure (HP) treatment on densification of poplar sapwood boards and subsequent coatings were evaluated. Tung oil (TO) and epoxy resin (ER)-coated treatments were used to improve the dimensional stability of HP-densified wood. The density of the wood after HP densification...
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
SpringerOpen
2020-06-01
|
| Series: | Journal of Wood Science |
| Subjects: | |
| Online Access: | https://doi.org/10.1186/s10086-020-01892-1 |
| Summary: | Abstract Effects of high-pressure (HP) treatment on densification of poplar sapwood boards and subsequent coatings were evaluated. Tung oil (TO) and epoxy resin (ER)-coated treatments were used to improve the dimensional stability of HP-densified wood. The density of the wood after HP densification increased from 450 ± 50 kg/m3 for the control to 960 ± 20 kg/m3 at 125 MPa. This process also resulted in the average thickness of HP-densified boards to reduce significantly from 29.7 ± 0.11 mm for the control to 18.8 ± 0.53 mm after HP densification at 25 MPa and 14.3 ± 0.10 mm after 125 MPa treatment for 30 s. The mechanical strength measured as the hardness of densified wood significantly increased from 35% at 25 MPa to 96% at 125 MPa treatment, compared to untreated wood. As expected both TO and ER-coated treatments significantly reduced set-recovery of densified wood when stored at four relative humidity environments. ER showed better anti-swelling performance than TO, and would be a better choice. |
|---|---|
| ISSN: | 1435-0211 1611-4663 |