Quenching and Partitioning of Multiphase Aluminum-Added Steels

Quenching and Partitioning of Multiphase Aluminum-Added Steels

The quenching and partitioning response following intercritical annealing was investigated for three lean TRIP-type high-Al steel compositions. Depending on the intercritical austenite fraction following annealing, the steels assumed either a ferrite/martensite/retained austenite microstructure or a...

Full description

Bibliographic Details
Main Authors:	Tuomo Nyyssönen, Olli Oja, Petri Jussila, Ari Saastamoinen, Mahesh Somani, Pasi Peura
Format:	Article
Language:	English
Published:	MDPI AG 2019-03-01
Series:	Metals
Subjects:	steel martensite austenite quenching partitioning dilatometry
Online Access:	https://www.mdpi.com/2075-4701/9/3/373

Similar Items

Competitive mechanisms occurring during quenching and partitioning of three silicon variants of 0.4 wt.% carbon steels
by: Ilkka Miettunen, et al.
Published: (2021-03-01)

Design of tough, ductile direct quenched and partitioned advanced high-strength steel with tailored silicon content
by: Sumit Ghosh, et al.
Published: (2022-03-01)

Microstructure and Mechanical Properties of Nb and V Microalloyed TRIP-Assisted Steels
by: Olli Oja, et al.
Published: (2019-08-01)

Microstructural Characterization and Mechanical Properties of Direct Quenched and Partitioned High-Aluminum and High-Silicon Steels
by: Pekka Kantanen, et al.
Published: (2019-02-01)

Influence of Quenching and Partitioning Parameters on Phase Transformations and Mechanical Properties of Medium Manganese Steel for Press-Hardening Application
by: Charline Blankart, et al.
Published: (2021-11-01)

The "quenching and partitioning" process: background and recent progress
by: John G. Speer, et al.
Published: (2005-12-01)

Microstructure and mechanical properties of a martensitic stainless steel (0.2%C–12%Cr) after quenching and partitioning (Q&P) process
by: Murilo Carmelo Satolo Marques, et al.
Published: (2023-05-01)

A Study of the Optimum Quenching Temperature of Steels with Various Hot Rolling Microstructures after Cold Rolling, Quenching and Partitioning Treatment
by: Bin Chen, et al.
Published: (2018-07-01)

Austenite Decomposition of a Lean Medium Mn Steel Suitable for Quenching and Partitioning Process: Comparison of CCT and DCCT Diagram and Their Microstructural Changes
by: Michal Krbata, et al.
Published: (2022-02-01)

Texture and mechanical properties of quenching and partitioning steel
by: Pengsheng Hu, et al.
Published: (2023-01-01)

Microstructure Evolution and Mechanical Response of a Direct Quenched and Partitioned Steel at Different Finishing Rolling Temperatures
by: Yajun Liu, et al.
Published: (2023-05-01)

Exploring the effect of complex hierarchic microstructure of quenched and partitioned martensitic stainless steels on their high cycle fatigue behaviour
by: A. Sierra-Soraluce, et al.
Published: (2023-09-01)

Effect of Intercritical Deformation on Microstructure and Mechanical Properties of Quenching and Partitioning Low Carbon Multiphase High-Strength Steel
by: Zhiqiang Yao, et al.
Published: (2022-11-01)

Influence of Austenite Grain Size on Mechanical Properties after Quench and Partitioning Treatment of a 42SiCr Steel
by: Sebastian Härtel, et al.
Published: (2019-05-01)

Influence of Parameters of Quenching and Partitioning Process on Microstructure and Fraction of Retained Austenite
by: A. Shirali, et al.
Published: (2015-07-01)

Influence of Parameters of Quenching and Partitioning Process on Microstructure and Fraction of Retained Austenite
by: A. Shirali, et al.
Published: (2015-07-01)

The Effect of Alloying on Mechanical Properties of Advanced High Strength Steels
by: Kučerová L., et al.
Published: (2014-10-01)

Experimental and Modeling Study of Phase-Specific Flow Stress Distribution in Intercritically Annealed Quenching and Partitioning Steels
by: Pengfei Gao, et al.
Published: (2022-10-01)

The Mechanism of High-Strength Quenching-Partitioning-Tempering Martensitic Steel at Elevated Temperatures
by: Ke Zhang, et al.
Published: (2019-02-01)

The Impact of Strain Heterogeneity and Transformation of Metastable Austenite on Springback Behavior in Quenching and Partitioning Steel
by: Yonggang Yang, et al.
Published: (2018-06-01)

The Effect of Quenching and Partitioning (Q&P) Process on the Structural and Mechanical Properties of AISI 4130 Steel
by: S. Hossain Reza, et al.
Published: (2022-11-01)

In Situ Observation of the Grain Growth Behavior and Martensitic Transformation of Supercooled Austenite in NM500 Wear-Resistant Steel at Different Quenching Temperatures
by: Zhongbo Li, et al.
Published: (2023-05-01)

Temperature Effects on Tensile Deformation Behavior of a Medium Manganese TRIP Steel and a Quenched and Partitioned Steel
by: Whitney A. Poling, et al.
Published: (2021-02-01)

Effect of Prior Cold Reduction of C–Si–Mn Hot-Rolled Sheet on Microstructures and Mechanical Properties after Quenching and Partitioning Treatment
by: Yuanyao Cheng, et al.
Published: (2022-05-01)

Investigating the role of the austenitizing temperature and cooling rate on the martensitic transformation kinetics in a SAE 9254 spring steel
by: Silvano Leal dos Santos, et al.
Published: (2024-03-01)

Effect of strain rate on microstructure and mechanical properties of hot stamping quenching-partitioning steel
by: WU Cong, et al.
Published: (2022-10-01)

The Microstructure and Phase Composition of 35CrSiMN5-5-4 Steel After Quenching and Partitioning Heat Treatment
by: Skołek E., et al.
Published: (2016-09-01)

Mechanisms of the Reverse Martensite-to-Austenite Transformation in a Metastable Austenitic Stainless Steel
by: Dmitrii Panov, et al.
Published: (2021-04-01)

Effect of tempering temperature on microstructure and mechanical properties of a low carbon bainitic steel treated by quenching-partitioning-tempering (QPT) process
by: Xingyu Liu, et al.
Published: (2023-03-01)

Dilatometric and Microstructural Study of Martensite Tempering in 4% Mn Steel
by: Adam Grajcar, et al.
Published: (2020-10-01)

Relationships between Strength, Ductility and Fracture Toughness in a 0.33C Steel after Quenching and Partitioning (Q&P) Treatment
by: Evgeniy Tkachev, et al.
Published: (2023-09-01)

Characterization of a Medium Mn-Ni Steel Q&P Treated by a High Partitioning Temperature Cycle
by: Maribel Arribas, et al.
Published: (2022-03-01)

Microstructure development and mechanical properties of a C-Mn-Si-Al-Cr cold rolled steel subjected to quenching and partitioning treatment
by: Mohsen Mohammadi Zahrani, et al.
Published: (2023-01-01)

Improving Hydrogen Embrittlement Resistance of Hot-Stamped 1500 MPa Steel Parts That Have Undergone a Q&P Treatment by the Design of Retained Austenite and Martensite Matrix
by: Zhou Wang, et al.
Published: (2020-11-01)

Comparison and Analysis on the Effects of Oil-Quenching and Salt-Quenching for Carburized Gear Ring
by: Xin Wang, et al.
Published: (2023-12-01)

Kinetics of Carbon Enrichment in Austenite during Partitioning Stage Studied via In-Situ Synchrotron XRD
by: Farnoosh Forouzan, et al.
Published: (2023-02-01)

Transformation-Induced Ductility of Reverse Austenite Evolved by Low-Temperature Tempering of Martensite
by: Pengju Du, et al.
Published: (2020-10-01)

Detection and Estimation of Retained Austenite in a High Strength Si-Bearing Bainite-Martensite-Retained Austenite Micro-Composite Steel after Quenching and Bainitic Holding (Q&B)
by: Shima Pashangeh, et al.
Published: (2019-04-01)

Effect of Innovative Quenching-Partitioning Heat Treatment on Microstructure and Hardness Properties of Medium Carbon Steel According to Traditional Quenching-Tempering Heat Treatment
by: Merve Şehnaz İŞYARLAR, et al.
Published: (2019-07-01)

Quasi-Situ Characterization of Retained Austenite Orientation in Quenching and Partitioning Steel via Uniaxial Tensile Tests
by: Pengfei Gao, et al.
Published: (2020-10-01)