| Summary: | Temperature is a critical factor for the performance and operation of photovoltaic (PV) generators, whose efficiency and electrical generation decreases as the temperature rises. For this reason, it is essential to sensor PV modules in order to continuously measure and track their operating temperature. This paper presents a network of digital temperature sensors (DS18B20) and a set of analogue sensors (PT-100) for a 1.1 kW polycrystalline PV array. The physical layout of the sensors on the modules is different depending on the nature of sensor for comparison purposes. These sensors are described in terms of their implementation and configuration, as well as the advantages and disadvantages of each installation. In addition, a model that estimates cell temperature from ambient temperature and incident solar irradiance is incorporated. Regarding data acquisition, an industrial controller and a remote input/output unit gather analogue measurements, whereas a low-cost Arduino board retrieves data from the digital sensors network. Both sensor signals are stored in a database, so experimental measurements and estimated data are visualised simultaneously using a web-based IoT software (Grafana) in real time. Finally, results under real operating conditions are reported and the data are analysed, proving the suitability between each sensor type and the model.
|
|---|