Cu-Ni-Sn alloy fabricated by melt spinning and selective laser melting: a comparative study on the microstructure and formation kinetics

Cu-Ni-Sn alloy fabricated by melt spinning and selective laser melting: a comparative study on the microstructure and formation kinetics

Composition modification (elemental modification) is found to be an effective method for tuning the bimodal microstructure (equiaxed and column grains) observed in the selective laser melted (SLM) metallic materials, and thereby improving their properties. However, optimization for the powder compos...

Full description

Bibliographic Details
Main Authors:	Chao Zhao, Zhi Wang, Daoxi Li, Lauri Kollo, Zongqiang Luo, Weiwen Zhang, Konda Gokuldoss Prashanth
Format:	Article
Language:	English
Published:	Elsevier 2020-11-01
Series:	Journal of Materials Research and Technology
Subjects:	Selective laser melting Melt spinning Rapid solidification Cu-15Ni-8Sn alloy
Online Access:	http://www.sciencedirect.com/science/article/pii/S2238785420317713

Similar Items

Characterization Alloys of the Sn-Zn System Produced by Melt Spinning
by: Luis Gustavo Cordiolli Russi, et al.
Published: (2020-05-01)

Microstructural study of Al-20Si-5Fe Alloys produced by melt-spinning
by: Aliyeh Rafiei, et al.
Published: (2013-03-01)

Study on Interfacial Bonding Properties of NiTi/CuSn10 Dissimilar Materials by Selective Laser Melting
by: Changhui Song, et al.
Published: (2022-03-01)

Enhanced Hydrogen Storage Kinetics of Nanocrystalline and Amorphous Mg2Ni-type Alloy by Melt Spinning
by: Hui-Ping Ren, et al.
Published: (2011-01-01)

Study of the microstructure and mechanical properties of Cu–Sn alloys formed by selective laser melting with different Sn contents
by: Peng Yang, et al.
Published: (2023-05-01)

Improving the Thermal Stability of the Fine-Grained Structure in the Cu-15Ni-8Sn Alloy during Solution Treatment by the Additions of Si and Ti
by: Chao Zhao, et al.
Published: (2023-02-01)

Antimicrobial Properties of Polyester/Copper Nanocomposites by Melt-Spinning and Melt-Blowing Techniques
by: Alain González-Sánchez, et al.
Published: (2023-12-01)

Effect of Nanosized Ni Reinforcements on the Structure of the Sn-3.0Ag-0.5Cu Alloy in Liquid and After-Reflow Solid States
by: Andriy Yakymovych, et al.
Published: (2023-06-01)

Effect of Sc Addition on the Microstructure and Mechanical Properties of Melt-Spun Al-10Ni Alloys
by: Fatih Kilicaslan M., et al.
Published: (2018-06-01)

Peculiarities of the melting-solidification processes by sinking of the melting blocks into high-temperature corium melt
by: Ali Kalvand, et al.
Published: (2009-06-01)

Properties of Stereocomplex PLA for Melt Spinning
by: Boris Marx, et al.
Published: (2023-11-01)

Crystallization Process and Microstructural Evolution of Melt Spun Al-RE-Ni-(Cu) Ribbons
by: Francisco G. Cuevas, et al.
Published: (2020-03-01)

Synthesis of Quasicrystal Al66Cu28Fe15B7 by Melt-Spinning
by: Luciano Nascimento
Published: (2021-07-01)

Melt-Spinning of an Intrinsically Flame-Retardant Polyacrylonitrile Copolymer
by: Simon König, et al.
Published: (2020-10-01)

Análisis y simulación del modelo térmico y viscoso del proceso de melt spinning
by: Marcelo Barone, et al.
Published: (2018-01-01)

Effects of the wheel rotation speed during the melt-spinning process on the structural morphology and the thermoelectric properties of Ti<sub>0.5</sub>Zr<sub>0.5</sub>NiSn alloy
by: Nguyen Van Du, et al.
Published: (2023-12-01)

Microstructure and mechanical properties of AlCoCrFeMnNi HEAs fabricated by selective laser melting
by: Pan Ma, et al.
Published: (2023-07-01)

Selective Laser Melting of CuSn10: Simulation of Mechanical Properties, Microstructure, and Residual Stresses
by: Robert Kremer, et al.
Published: (2022-05-01)

Controlled Atmosphere Brazing of 3003 Aluminum Alloy Using Low-Melting-Point Filler Metal Fabricated by Melt-Spinning Technology
by: Zeng Gao, et al.
Published: (2022-09-01)

High-reliability repair of single-crystal Ni-base superalloy by selective electron beam melting
by: S. Tao, et al.
Published: (2022-12-01)

Crystal Structure Evolution of UHMWPE/HDPE Blend Fibers Prepared by Melt Spinning
by: Fei Wang, et al.
Published: (2017-03-01)

Regularities of Martensitic Transformations of Fe–Ni Alloys Rapidly Quenched from Melt
by: V. Yu. Danilchenko, Ye. M. Dzevin, and R. M. Delidon
Published: (2022-03-01)

CHARACTERISATION AND PRODUCTION OF POLY (LACTIC ACID)/POLY(ETHYLENE GLYCOL) MICROFIBER VIA MELT DRAWN SPINNING PROCESS
by: Nur Atiqah Mohd. Akhir, et al.
Published: (2021-01-01)

High-ZT Due to the Influence of Copper in Ti(Ni<sub>1-<i>x</i></sub>Cu<i><sub>x</sub></i>)Sn
by: Yatir Sadia, et al.
Published: (2023-02-01)

Hydrogen-induced amorphization of Zr-Cu-Ni-Al alloy
by: Fu-yu Dong, et al.
Published: (2017-03-01)

UNCONSTRAINED MELTING AND SOLIDIFICATION INSIDE RECTANGULAR ENCLOSURE
by: A. A. Rabinataj Darzi, et al.
Published: (2015-09-01)

MELTING OF BINARY METAL NANOWIRES: MOLECULAR DYNAMICS SIMULATION
by: S.A. Vasilyev, et al.
Published: (2019-12-01)

Study of Microstructure and Thermal Properties of the Low Melting Bi-In-Sn Eutectic Alloys
by: Ivana Manasijević, et al.
Published: (2018-10-01)

Selective Laser Melting of Ti-45Nb Alloy
by: Holger Schwab, et al.
Published: (2015-04-01)

Problem of corium melt coolability in passive protection systems against severe accidents in the containment
by: Ali Kalvand, et al.
Published: (2018-05-01)

Microstructure evolution and mechanical property of directionally solidified Cu-9Ni-6Sn alloy wire during aging
by: Meng Wang, et al.
Published: (2022-11-01)

Dynamics at crystal/melt interface during solidification of multicrystalline silicon
by: Fujiwara Kozo, et al.
Published: (2022-02-01)

Melting trajectory of the asymmetrically-heated conical thermal head for ice-melting probes
by: Yuting Ye, et al.
Published: (2024-03-01)

Microstructure, Mechanical Properties, and Fatigue Fracture Characteristics of High-Fracture-Resistance Selective Laser Melting Al-Ni-Cu Alloys
by: Kai-Chieh Chang, et al.
Published: (2021-01-01)

Effects of Sb and/or Sn concentrations on the SbSn formation in a ternary melt-spun Pb–Sb–Sn alloy
by: E.A. Ali, et al.
Published: (2022-12-01)

Effect of heat transfer between melt puddle and cooling wheel on amorphous ribbon formation
by: Sowjanya Madireddi
Published: (2020-10-01)

On the role of energy input in the surface morphology and microstructure during selective laser melting of Inconel 718 alloy
by: Min Zheng, et al.
Published: (2021-03-01)

High Temperature Oxidation Property of Ni Based Superalloy CM247LC Produced Via Selective Laser Melting Process
by: Jung-Uk Lee, et al.
Published: (2023-03-01)

Fabrication and Performance of Phase Change Thermoregulated Fiber from Bicomponent Melt Spinning
by: Zenan Liu, et al.
Published: (2022-05-01)

A versatile hot melt centrifugal spinning apparatus for thermoplastic microfibres production
by: Jason Gunther, et al.
Published: (2023-09-01)