Effect of PTCAP Passes on the Mechanical Properties of Copper Tubes
Commercially pure copper samples were successfully deformed by parallel tubular channel angular pressing (PTCAP) up to different passes at room temperature. The effects of the PTCAP number of passes on the microstructure, mechanical properties, microhardness and wear resistance of the processed samp...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Port Said University
2017-09-01
|
| Series: | Port Said Engineering Research Journal |
| Subjects: | |
| Online Access: | https://pserj.journals.ekb.eg/article_33303_b8592e241d184f9216567964818962a6.pdf |
| Summary: | Commercially pure copper samples were successfully deformed by parallel tubular channel angular pressing (PTCAP) up to different passes at room temperature. The effects of the PTCAP number of passes on the microstructure, mechanical properties, microhardness and wear resistance of the processed samples were fully investigate. The microstructure of processed samples were observed by SEM and showed notable decrease in the grain size with increase number of passes. The mechanical properties of the pure copper in each pass were studied by tensile testing and microhardness method at room temperature. In this respect, UTS, σ 0.2% and microhardness have been markedly improved from 199.03, 102.17 MPa and 67.83 HV as the annealed condition to 331.40, 293.51 MPa and 144.03 HV after the forth pass, respectively. Besides, the elongation percent were decreased while, the wear resistance improved with increased number of PTCAP passes. Ductile fracture with extensive necking zone and many big dimples occurs in annealed samples, while fine dimples were decreased with the deformation final passes of PTCAP processed samples. |
|---|---|
| ISSN: | 1110-6603 2536-9377 |