| Summary: | Although traffic exhaust emissions in Europe have been drastically reduced, airborne particle emissions caused by brakes and tires are still increasing with the number of vehicles. The measurement of non-exhaust emissions is an emerging technological challenge. We present a custom measurement setup to investigate the brake- and tire-wear emissions of an in-use battery electric vehicle. A separate brake housing and HEPA ventilation enabled airborne brake wear emissions to be measured under realistic conditions without external influences. The emission tests on a chassis dynamometer included particle number concentrations and particle size distribution for diameters of 4 nm to 10 μm. Emission indices were determined for three driving cycles: WLTC Class 3b, WLTC Brake Part 10, and a real driving cycle. Further investigations focused on emission control through regenerative braking and brake coating. Driving with regenerative braking reduced emissions by up to 89.9%, which related to the concentration of particles in the ultrafine/fine size range. Hard-metal brake coating led to a further significant reduction in emissions of up to 78.9%. The results point the way to future RDE measurement of non-exhaust emissions and show the potential of regenerative braking and brake coating to reduce airborne brake wear emissions.
|
|---|