Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engine

Abstract Ammonia (NH3) is emerging as a potential favoured fuel for longer range decarbonised heavy transport, particularly in the marine sector, predominantly due to highly favourable characteristics as an effective hydrogen carrier. This is despite generally unfavourable combustion and toxicity at...

Full description

Bibliographic Details
Main Authors: A. Ambalakatte, S. Geng, A. Cairns, A. Harrington, J. Hall, M. Bassett
Format: Article
Language:English
Published: Springer 2023-12-01
Series:Carbon Neutrality
Subjects:
Online Access:https://doi.org/10.1007/s43979-023-00075-3
_version_ 1797376791127523328
author A. Ambalakatte
S. Geng
A. Cairns
A. Harrington
J. Hall
M. Bassett
author_facet A. Ambalakatte
S. Geng
A. Cairns
A. Harrington
J. Hall
M. Bassett
author_sort A. Ambalakatte
collection DOAJ
description Abstract Ammonia (NH3) is emerging as a potential favoured fuel for longer range decarbonised heavy transport, particularly in the marine sector, predominantly due to highly favourable characteristics as an effective hydrogen carrier. This is despite generally unfavourable combustion and toxicity attributes, restricting end use to applications where robust health and safety protocols can always be upheld. In the currently reported work, a spark ignited thermodynamic single cylinder research engine equipped with gasoline direct injection was upgraded to include gaseous ammonia port injection fuelling, with the aim of understanding maximum viable ammonia substitution ratios across the speed-load operating map. The work was conducted at varied effective compression ratios under overall stoichiometric conditions, with the spark timing re-optimised for maximum brake torque at all stable logged sites. The experiments included industry standard measurements of combustion, performance, and engine-out emissions (including NH3 “slip”). With a geometric compression ratio of 11.2:1, it was found possible to run the engine on pure ammonia at low engine speeds (1000-1800 rpm) and loads of 12 bar net IMEP. When progressively dropping down below this load limit an increasing amount of gasoline co-firing was required to avoid engine misfire. When operating at 1800 rpm and 12 bar net IMEP, all emissions of carbon (CO2, CO, unburned hydrocarbons) and NOx decreased considerably when switching to higher NH3 substitution ratios, with NOx reduced by ~ 45% at 1800 rpm/12 bar when switching from pure gasoline to pure NH3 (associated with longer and cooler combustion). By further increasing the geometric compression ratio to 12.4 and reducing the intake camshaft duration for maximum effective compression ratio, it was possible to operate the engine on pure ammonia at much lower loads in a fully warmed up state (e.g., linear low load limit line from 1000 rpm/6 bar net IMEP to 1800 rpm/9 bar net IMEP). Under all conditions, the indicated thermal efficiency of the engine was either equivalent to or slightly higher than that obtained using gasoline-only due to the favourable anti-knock rating of NH3. Ongoing work is concerned with detailed breakdown of individual NOx species together with measuring the impact of hydrogen enrichment across the operating map.
first_indexed 2024-03-08T19:43:41Z
format Article
id doaj.art-aac8f2ab004442d2a144b16335477276
institution Directory Open Access Journal
issn 2731-3948
language English
last_indexed 2024-03-08T19:43:41Z
publishDate 2023-12-01
publisher Springer
record_format Article
series Carbon Neutrality
spelling doaj.art-aac8f2ab004442d2a144b163354772762023-12-24T12:31:03ZengSpringerCarbon Neutrality2731-39482023-12-012111710.1007/s43979-023-00075-3Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engineA. Ambalakatte0S. Geng1A. Cairns2A. Harrington3J. Hall4M. Bassett5Powertrain Research Centre, University of NottinghamPowertrain Research Centre, University of NottinghamPowertrain Research Centre, University of NottinghamMAHLE Powertrain LtdMAHLE Powertrain LtdMAHLE Powertrain LtdAbstract Ammonia (NH3) is emerging as a potential favoured fuel for longer range decarbonised heavy transport, particularly in the marine sector, predominantly due to highly favourable characteristics as an effective hydrogen carrier. This is despite generally unfavourable combustion and toxicity attributes, restricting end use to applications where robust health and safety protocols can always be upheld. In the currently reported work, a spark ignited thermodynamic single cylinder research engine equipped with gasoline direct injection was upgraded to include gaseous ammonia port injection fuelling, with the aim of understanding maximum viable ammonia substitution ratios across the speed-load operating map. The work was conducted at varied effective compression ratios under overall stoichiometric conditions, with the spark timing re-optimised for maximum brake torque at all stable logged sites. The experiments included industry standard measurements of combustion, performance, and engine-out emissions (including NH3 “slip”). With a geometric compression ratio of 11.2:1, it was found possible to run the engine on pure ammonia at low engine speeds (1000-1800 rpm) and loads of 12 bar net IMEP. When progressively dropping down below this load limit an increasing amount of gasoline co-firing was required to avoid engine misfire. When operating at 1800 rpm and 12 bar net IMEP, all emissions of carbon (CO2, CO, unburned hydrocarbons) and NOx decreased considerably when switching to higher NH3 substitution ratios, with NOx reduced by ~ 45% at 1800 rpm/12 bar when switching from pure gasoline to pure NH3 (associated with longer and cooler combustion). By further increasing the geometric compression ratio to 12.4 and reducing the intake camshaft duration for maximum effective compression ratio, it was possible to operate the engine on pure ammonia at much lower loads in a fully warmed up state (e.g., linear low load limit line from 1000 rpm/6 bar net IMEP to 1800 rpm/9 bar net IMEP). Under all conditions, the indicated thermal efficiency of the engine was either equivalent to or slightly higher than that obtained using gasoline-only due to the favourable anti-knock rating of NH3. Ongoing work is concerned with detailed breakdown of individual NOx species together with measuring the impact of hydrogen enrichment across the operating map.https://doi.org/10.1007/s43979-023-00075-3AmmoniaIC enginesCombustionZero carbonE-fuelsRenewable fuels
spellingShingle A. Ambalakatte
S. Geng
A. Cairns
A. Harrington
J. Hall
M. Bassett
Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engine
Carbon Neutrality
Ammonia
IC engines
Combustion
Zero carbon
E-fuels
Renewable fuels
title Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engine
title_full Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engine
title_fullStr Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engine
title_full_unstemmed Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engine
title_short Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engine
title_sort evaluation of ammonia gasoline co combustion in a modern spark ignition research engine
topic Ammonia
IC engines
Combustion
Zero carbon
E-fuels
Renewable fuels
url https://doi.org/10.1007/s43979-023-00075-3
work_keys_str_mv AT aambalakatte evaluationofammoniagasolinecocombustioninamodernsparkignitionresearchengine
AT sgeng evaluationofammoniagasolinecocombustioninamodernsparkignitionresearchengine
AT acairns evaluationofammoniagasolinecocombustioninamodernsparkignitionresearchengine
AT aharrington evaluationofammoniagasolinecocombustioninamodernsparkignitionresearchengine
AT jhall evaluationofammoniagasolinecocombustioninamodernsparkignitionresearchengine
AT mbassett evaluationofammoniagasolinecocombustioninamodernsparkignitionresearchengine