| Summary: | Preheating furnaces, which are commonly used in many production sectors (e.g., iron and steel), are simultaneously one of the most energy-intensive devices used in the industry. Partial replacement of natural gas with biomass-derived synthesis gas as a fuel used for heating would be an important step towards limiting industrial CO<sub>2</sub> emissions. The time dependent computational fluid dynamics (CFD) model of an exemplary furnace was created to evaluate whether it is possible to obtain 40% of energy from syngas combustion without deterioration of thermal parameters of the treated load. As an outcome, a promising method to organize co-firing in the furnace was indicated. The obtained results show that the co-firing method (up to 40% thermal natural gas replacement with syngas), assuming low air-to-fuel equivalence ratio (λ<sub>NG</sub> = 2.0) and even distribution of power among the furnace corners, lead to satisfactory efficiency of the heat treatment process—the heat transferred to the load exceeds 95% of the heat delivered to the load in the reference case), while carbon dioxide emission is reduced from 285.5 to 171.3 kg CO<sub>2</sub>/h. This study showed that it is feasible (from the heat transfer point of view) to decrease the environmental impact of the process industries by the use of renewable fuels.
|
|---|