ANALYSIS OF EFFICIENCY WASTE HEAT RECOVERY THERMORESSURE-EJECTOR REFRIGERATING MACHINE
One of the ways to increase the energy efficiency of ejector refrigerating machines is to use of thermopressor technologies, which are based on to use of the process of thermogasdynamic compression. This process consists in contact cooling and at the same time increasing the gas or steam pressure. T...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
National Aerospace University «Kharkiv Aviation Institute»
2019-08-01
|
| Series: | Авіаційно-космічна техніка та технологія |
| Subjects: | |
| Online Access: | http://nti.khai.edu/ojs/index.php/aktt/article/view/866 |
| Summary: | One of the ways to increase the energy efficiency of ejector refrigerating machines is to use of thermopressor technologies, which are based on to use of the process of thermogasdynamic compression. This process consists in contact cooling and at the same time increasing the gas or steam pressure. The thermopressor application in the ejector refrigerating machines cycle installed at the outlet of the ejector, allows, by increasing the pressure during vapour contact cooling to a saturation tempera-ture, to increase the ejection coefficient U and, accordingly, the thermal coefficient z. A number of refrigerants were chosen for analysis of cycle of ejector refrigerating machines, among which those traditionally is used for ejector refrigerating ma-chines, and a number of other refrigerants that can be used in ejector refrigerating machines based on the possibility of using the thermopressor. It is possible to in-crease the ejector refrigerating machines efficiency by using the thermopressor while ensuring a greater temperature difference. With the temperature difference 60–100 oC, the relative pressure increase is mostly positive. The following refrigerants have the most significance: R717, R134a, R227ea, R1234ze(E), R1234yf. Analysis of the ejector refrigerating machines scheme by using the thermopressor shows that the greatest efficiency at the highest possible boiling points in the generator tg is the refrigerants: R142b, R600, R1233zd(Е), R245fa. |
|---|---|
| ISSN: | 1727-7337 2663-2217 |