Effects of solution and aging treatment parameters on the microstructure evolution of Ti–10V–2Fe–3Al alloy

The solution-aging treatment parameters, including solution temperature, cooling rate and aging temperature, have significant influences on the microstructures and comprehensive mechanical properties of titanium alloy. In this work, the detailed microevolution behaviors of Ti–10V–2Fe–3Al alloy under...

Full description

Bibliographic Details
Main Authors: Zhang Wan-Liang, Hao Wen-Tao, Xiong Wei, Quan Guo-Zheng, Zhao Jiang, Shi Rui-Ju, Liu Qiao
Format: Article
Language:English
Published: De Gruyter 2020-09-01
Series:High Temperature Materials and Processes
Subjects:
Online Access:https://doi.org/10.1515/htmp-2020-0060
Description
Summary:The solution-aging treatment parameters, including solution temperature, cooling rate and aging temperature, have significant influences on the microstructures and comprehensive mechanical properties of titanium alloy. In this work, the detailed microevolution behaviors of Ti–10V–2Fe–3Al alloy under different solution and aging conditions have been investigated through a series of heat-treatment experiments. The results of solution-treatment experiments reveal that the content of αp-phase is reduced to zero as the solution temperature is raised to a certain α → β critical transformation point. Recrystallized β-grains can be observed at the solution temperature of 820°C. In addition, the cooling way (air cooling or water cooling) has little influence on the microevolution behaviors for this alloy during the solution-treatment process. As for the solution-aging-treatment experiments, the results reveal that αs-phases are precipitated from the supersaturated β-phase, and the fraction of αs-phase increases with increasing aging temperature. However, the precipitated α-grains intend to coalesce and coarsen as the aging temperature raises above 510°C. Therefore, the advocated solution-aging-treatment program is solution treatment at 820°C with air cooling followed by aging treatment at 510°C with air cooling.
ISSN:0334-6455
2191-0324