| Summary: | The low-voltage and high-current permanent magnet synchronous generator (PMSG), which has characteristics of high power density, small size, and excellent energy saving, is representative of the generators. As a key module of the integrated DC output system of PMSG, the low-voltage and high-current rectifier module is also a nonlinear time-varying system that is readily influenced by parametric changes and external disturbances. Aiming at the shortcomings of traditional control strategies, this paper proposes a novel low-voltage and high-power rectifier module control strategy based on nonlinear feed-forward PID control. The controller has a wide range of environmental applications because of its greater robustness. At the same time, the introduction of feed-forward control shortens regulation time of the system. Therefore, the combination of the two control methods can improve the dynamic performance of the system without influencing the steady-state performance. The simulation model of an integrated rectifier system based on SVPWM control was constructed by Simulink, which can achieve a rated output of 5 V/300 A. At the same time, the simulation model of the controller is constructed and applied to the rectifier output system of a 5 V/300 A synchronous generator to complete the nonlinear feed-forward PID control. Through the comparison between simulation and experiment, it has been proven that the control method can effectively resist the load disturbances and improve the response speed of the system.
|
|---|