Thermodynamic Assessment of Mushy Zone in Directional Solidification

Thermodynamic Assessment of Mushy Zone in Directional Solidification

Solidification of AlSiFe alloys was studied using a directional solidification facility and the CALPHAD technique was applied to calculate phase diagrams and to predict occurring phases. The specimens solidified by electromagnetic stirring showed segregation across, and the measured chemical composi...

Full description

Bibliographic Details
Main Authors:	Mikołajczak P., Ratke L.
Format:	Article
Language:	English
Published:	Polish Academy of Sciences 2015-12-01
Series:	Archives of Foundry Engineering
Subjects:	Aluminum alloys Directional solidification Mushy zone CALPHAD Fe intermetallics β-Al5FeSi
Online Access:	http://www.degruyter.com/view/j/afe.2015.15.issue-4/afe-2015-0088/afe-2015-0088.xml?format=INT

Similar Items

Three Dimensional Morphology of β-Al5FeSi Intermetallics in AlSi Alloys
by: Mikołajczak P., et al.
Published: (2015-03-01)

The Impacts of Co and Ni Additions to High Solute Content Fe-Contaminated Al alloys in Beneficing Microstructure and Tensile Properties
by: Marcella Gautê Cavalcante Xavier, et al.
Published: (2024-03-01)

The Effect of the β-Al<sub>5</sub>FeSi Phases on Microstructure, Mechanical and Fatigue Properties in A356.0 Cast Alloys with Higher Fe Content without Additional Alloying of Mn
by: Lenka Kuchariková, et al.
Published: (2021-04-01)

Prediction of mushy zone permeability of Al-4.5wt%Cu alloy during solidification by phase field model and CFD simulation
by: Long-fei Li, et al.
Published: (2019-09-01)

The Microstructure Evolution and Mass Transfer in Mushy Zone during High-Pressure Solidifying Hypoeutectic Al-Ni Alloy
by: Xiaohong Wang, et al.
Published: (2020-10-01)

Effects of Ni and Co on the Corrosion Resistance of Al-Si-Cu-Zn-Fe Alloys in NaCl Solution
by: Marcella G. C. Xavier, et al.
Published: (2022-04-01)

Effect of thermodiffusion on the fluid flow, heat transfer, and solidification of molten metal alloys
by: E. Jafar-Salehi, et al.
Published: (2016-03-01)

Removal of Fe impurities from Al alloy scraps by electromagnetic directional solidification combined with Si addition
by: Yakun Zhang, et al.
Published: (2023-09-01)

A CALPHAD thermodynamic model for multicomponent alloys under pressure and its application in pressurized solidified Al–Si–Mg alloys
by: Wang Yi, et al.
Published: (2024-06-01)

Fe-Si Intermetallics/Al<sub>2</sub>O<sub>3</sub> Composites Formed between Fe-20% Si and Fe-70.5% Si by SHS Metallurgy Method
by: Chun-Liang Yeh, et al.
Published: (2022-08-01)

Effect of Cooling Rate on the Microstructure Evolution and Mechanical Properties of Iron-Rich Al–Si Alloy
by: Xiao Shen, et al.
Published: (2022-01-01)

Fabrication and Physical Properties of Single-Crystalline Βeta-FeSi2 Nanowires
by: Chih-Yung Yang, et al.
Published: (2020-10-01)

Properties of Additively Manufactured Electric Steel Powder Cores with Increased Si Content
by: Giulia Stornelli, et al.
Published: (2021-03-01)

Sensitivity of Numerical Predictions to the Permeability Coefficient in Simulations of Melting and Solidification Using the Enthalpy-Porosity Method
by: Amin Ebrahimi, et al.
Published: (2019-11-01)

Intermetallics Formation during Solidification of Al-Si-Cu-Mg Cast Alloys
by: Adel M. A. Mohamed, et al.
Published: (2022-02-01)

Effects of Thermal Variables of Solidification on the Microstructure, Hardness, and Microhardness of Cu-Al-Ni-Fe Alloys
by: Maurício Silva Nascimento, et al.
Published: (2019-04-01)

The roles of solidification cooling rate and (Mn,Cr) alloying elements in the modification of β-AlFeSi and hardness evolvements in near-eutectic Al-Si alloys
by: R. Kakitani, et al.
Published: (2023-03-01)

Prediction of Cracking Susceptibility of Commercial Aluminum Alloys during Solidification
by: Fan Zhang, et al.
Published: (2021-09-01)

Iron Intermetallic Phases in the Alloy Based on Al-Si-Mg by Applying Manganese
by: Podprocká R., et al.
Published: (2017-09-01)

Intrinsic blocking effect of FeSi alloy in LiPF6 electrolyte solutions
by: Huaiyu Zhong, et al.
Published: (2022-09-01)

Effect of withdrawal rates on temperature field and grain competitive growth of directionally solidified DZ4125 alloy
by: LIU Guohuai, et al.
Published: (2023-04-01)

Solidification microstructure manipulation mechanism of hypoeutectic and hypereutectic Al–Si alloys controlled by trace in-situ nano-Fe2B and nano-Fe3Si
by: Xiang-Yi Song, et al.
Published: (2022-11-01)

Solidification microstructure of Cu–Cr and Cu–Cr-In alloys
by: Yunqing Zhu, et al.
Published: (2020-01-01)

Thermodynamic Assessment of Ti-Al-Fe-V Quaternary System Applied to Novel Titanium Alloys Designing
by: Qisheng Feng, et al.
Published: (2022-03-01)

Solidification Mechanism of the D-Gun Sprayed Fe-Al Particles
by: Wołczyński W., et al.
Published: (2017-12-01)

Precipitation Hardening of the Electrical Conductor Aluminum Alloy 6201
by: Alyaqadhan Allamki, et al.
Published: (2023-06-01)

Effect of Ta Interlayers on Texture and Magnetic Properties of FeSi Films with Micrometer Thickness
by: Jialian He, et al.
Published: (2022-09-01)

Solidification characteristics of Fe-Ni peritectic alloy thin strips under a near-rapid solidification condition
by: Chang-jiang Song, et al.
Published: (2015-05-01)

Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels
by: Algendy Ahmed Y., et al.
Published: (2020-01-01)

Thermodynamic assessment of the Fe-Nb-Si system
by: Jiang Y., et al.
Published: (2021-01-01)

Primary Crystals of AlfeMnSi Intermetallics in the Cast AlSi Alloys
by: Warmuzek M.
Published: (2017-09-01)

High-ductility AA6061 alloys produced by combination of sub-rapid solidification and Cr-alloying
by: Xuan Wang, et al.
Published: (2022-05-01)

Effects of cellular growth on fatigue life of directionally solidified hypoeutectic Al-Fe Alloys
by: Pryscilla Liberato Ribeiro, et al.
Published: (2014-02-01)

Formation of AlFeSi phase in AlSi12 alloy with Ce addition
by: S. Kores, et al.
Published: (2012-04-01)

Electrical resistivity of FeSi alloy under high pressure
by: Thi Hong Nguyen
Published: (2023-06-01)

Effects of Mn addittion, cooling rate and holding temperature on the modification and purification of iron-rich compounds in AlSi10MnMg(Fe) alloy
by: Jon Mikel Sanchez, et al.
Published: (2023-02-01)

Intrinsic and Extrinsic Effects of Microstructure on Properties in Cast Al Alloys
by: Murat Tiryakioğlu
Published: (2020-04-01)

Evaluation of the Possibilities of Occurrence of Harmful Effects Caused by Some Ferroalloys used in the Metallurgical Industry on the Environment
by: Vasile BAȘLIU
Published: (2019-12-01)

Critical Evaluation and Thermodynamic Re-Optimization of the Si–P and Si–Fe–P Systems
by: Zhimin You, et al.
Published: (2023-05-01)

An approach to determine enthalpies of formation for ternary compounds
by: Du Y., et al.
Published: (2010-01-01)