Erosion development in AISI 316L stainless steel under pulsating water jet treatment

Erosion development in AISI 316L stainless steel under pulsating water jet treatment

Erosion of solids by liquid droplets is a phenomenon which is a compromise between mechanical properties of the material and droplet hydrodynamic parameters. While a number of studies deal with the deformation of drops, the deformation evolution inside the material has not yet been revealed, mainly...

ver descrição completa

Detalhes bibliográficos
Principais autores:	Sergej Hloch, Jakub Poloprudský, Filip Šiška, Tomáš Babinský, Akash Nag, Alice Chlupová, Tomáš Kruml
Formato:	Artigo
Idioma:	English
Publicado em:	Elsevier 2024-02-01
coleção:	Engineering Science and Technology, an International Journal
Assuntos:	Erosion Wear Pulsating water jet AISI 316L Stainless steel Surface integrity
Acesso em linha:	http://www.sciencedirect.com/science/article/pii/S2215098624000168

Registros relacionados

Comparison of tribological and corrosion characteristics of AISI 316Ti and AISI 430 stainless steels
por: Čuchor Dávid, et al.
Publicado em: (2024-12-01)

Optimization of machining parameters while turning AISI316 stainless steel using response surface methodology
por: Mulugundam Siva Surya
Publicado em: (2024-12-01)

Obtaining a nanoporous Layer by the Anodizing Process on AISI 316L Steel to Obtain Better Corrosion Resistance Properties in Metallic Biomaterials Applications
por: M. Petry, et al.
Publicado em: (2024-05-01)

Surface modification of AISI 316L stainless steel by applying single and multilayer coatings: Study of elastic modulus and antibacterial properties
por: Bahare Soltani, et al.
Publicado em: (2025-01-01)

Effects of Surface Softening on the Mechanical Properties of an AISI 316L Stainless Steel under Cyclic Loading
por: Tiehui Fang, et al.
Publicado em: (2021-11-01)

Assessment of surface irregularities created by controlled liquid droplet on the surface of stainless steel AISI 304L
por: Gabriel Stolárik, et al.
Publicado em: (2023-11-01)

Optimize the corrosion behaviour and mechanical properties of AISI 316 stainless steel under heat treatment and previous cold working
por: Lieth Haider Mahdi, et al.
Publicado em: (2024-04-01)

An Investigation of Joining Polyamide (PA) to Stainless Steel AISI 316L by Hot Press Process
por: Osamah Sabah Barrak, et al.
Publicado em: (2023-03-01)

Tribological and Morphological Study of AISI 316L Stainless Steel during Turning under Different Lubrication Conditions
por: C. P. Natesh, et al.
Publicado em: (2023-01-01)

Stress–Corrosion Cracking of AISI 316L Stainless Steel in Seawater Environments: Effect of Surface Machining
por: Zhe Ren, et al.
Publicado em: (2020-10-01)

Microstructure and mechanical properties of modified 316L stainless steel alloy for biomedical applications using powder metallurgy
por: Ali, Sadaqat, et al.
Publicado em: (2022)

Directed Energy Deposition of AISI 316L Stainless Steel Powder: Effect of Process Parameters
por: Alberta Aversa, et al.
Publicado em: (2021-06-01)

Experimental investigation of the impact of GMAW welding parameters on the mechanical properties of AISI 316L/ER 316L using quaternary shielding gas
por: Samir Khrais, et al.
Publicado em: (2024-01-01)

Grafit Parçacık Takviyeli Nano Akışkan Kullanılarak AISI 316’nın Frezelenmesinde Yüzey Pürüzlülüğü ve Kesme Sıcaklığının Optimizasyonu
por: Çağrı Vakkas Yıldırım
Publicado em: (2019-01-01)

The Influence of the Ratio of Circumference to Cross-Sectional Area of Tensile Bars on the Fatigue Life of Additive Manufactured AISI 316L Steel
por: Luka Ferlič, et al.
Publicado em: (2024-11-01)

Effect of MIG Welding Parameters on Mechanical Properties of Dissimilar Weld Joints of AISI 202 and AISI 316 Steels
por: Venkatratnam Dirisala, et al.
Publicado em: (2020-06-01)

Mechanical Characterization of AISI 316L Samples Printed Using Material Extrusion
por: Mattia Carminati, et al.
Publicado em: (2022-01-01)

Effect of TIG welding parameters on 316 L stainless steel joints using taguchi L27 approach
por: Samir Khrais, et al.
Publicado em: (2024-01-01)

Study of Multilayer Welded Structure Made of AISI 316LSi Using WAAM
por: Katarína Bártová, et al.
Publicado em: (2024-01-01)

Erosion–Corrosion of AISI 304L Stainless Steel Affected by Industrial Copper Tailings
por: Álvaro Soliz, et al.
Publicado em: (2020-07-01)

Prediction of Model Distortion by FEM in 3D Printing via the Selective Laser Melting of Stainless Steel AISI 316L
por: Marek Pagac, et al.
Publicado em: (2021-02-01)

Characterization and corrosion behaviours of AISI 316 in hydrochloric environment at various concentrations
por: Sani Adams Mohammed, et al.
Publicado em: (2020-09-01)

Soft computing for sustainable drilling of AISI 316L stainless steel under formulated neem oil minimum quantity lubrication condition
por: C.P. Natesh, et al.
Publicado em: (2023-12-01)

Study of Resistance Spot Welding Between AISI 301 Stainless Steel and AISI 1020 Carbon Steel Dissimilar Alloys
por: M. Ishak, et al.
Publicado em: (2014-06-01)

The effects of SLM process parameters on the relative density and hardness of austenitic stainless steel 316L
por: Mohammadamin Bakhtiarian, et al.
Publicado em: (2024-03-01)

Functional properties of expanded austenite generated on AISI 316L by plasma nitrocarburizing using different active screen materials
por: S M Jafarpour, et al.
Publicado em: (2024-01-01)

Effect of high-energy shot peening on the corrosion behavior and chloride threshold concentration of AISI 316L stainless steel rebar in simulated concrete pore solution
por: Sadegh Pour-Ali, et al.
Publicado em: (2024-05-01)

Strengthening Effect after Disintegration of Stainless Steel Using Pulsating Water Jet
por: Sergej Hloch, et al.
Publicado em: (2018-01-01)

Laser Weld Aspect Optimization of Thin AISI 316 SS Using RSM in Relation with Welding Parameters and Sulfur Content
por: Kamel Touileb, et al.
Publicado em: (2023-06-01)

Exploring the impact of laser surface oxidation parameters on surface chemistry and corrosion behaviour of AISI 316L stainless steel
por: Mark Swayne, et al.
Publicado em: (2024-08-01)

Investigation of microstructure and Isothermal oxidation resistance of cermet HVOF coated on AISI316L at 900 °C
por: Naveen Kumar, et al.
Publicado em: (2024-02-01)

Modification of Microstructure and Mechanical Parameters of Austenitic Steel AISI 316L under the Action of Low Friction
por: Daria Grabco, et al.
Publicado em: (2023-07-01)

Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC
por: Ali Hedayati, et al.
Publicado em: (2017-01-01)

Wire Electrical Discharge Machining of AISI304 and AISI316 Alloys: A Comparative Assessment of Machining Responses, Empirical Modeling and Multi-Objective Optimization
por: Mona A. Aboueleaz, et al.
Publicado em: (2023-11-01)

Research efficiency electrochemical polishing variable section samples with different roughness of steel AISI 316L, manufactured by technology of selective laser melting
por: Сергій Вікторович Аджамський, et al.
Publicado em: (2021-04-01)

Microstructure and Mechanical Properties of AISI 316L Produced by Directed Energy Deposition-Based Additive Manufacturing: A Review
por: Abdollah Saboori, et al.
Publicado em: (2020-05-01)

Implementation of ABAQUS User Subroutines for Viscoplasticity of 316 Stainless Steel and Zircaloy-4
por: Xiaowei Yue, et al.
Publicado em: (2023-09-01)

Datasets describing optimization of the cutting regime in the turning of AISI 316L steel for biomedical purposes based on the NSGA-II and NSGA-III multi-criteria algorithms
por: Hiovanis Castillo Pantoja, et al.
Publicado em: (2023-10-01)

Analysis of Unexpected Leaks in AISI 316L Stainless Steel Pipes Used for Water Conduction in a Port Area
por: Borja Arroyo, et al.
Publicado em: (2023-02-01)

The effect of different powder mixtures used in the boriding process on the surface properties of AISI 304 stainless steel material
por: Ece Simooğlu Sari, et al.
Publicado em: (2024-01-01)