Study on Adhesive and Microstructure Properties of Rice Husk Ash-Based Geopolymer Hybrid Alkyd Coating
ABSTRACTEnsuring strong adhesion, especially under varying environmental conditions, is a significant challenge in the field of coating technology. This research aims to enhance alkyd paint adhesive strength by incorporating rice husk ash-based geopolymer (GP-RHA) as a filler. Response Surface Metho...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Taylor & Francis Group
2024-12-01
|
| Series: | Journal of Natural Fibers |
| Subjects: | |
| Online Access: | https://www.tandfonline.com/doi/10.1080/15440478.2024.2317427 |
| Summary: | ABSTRACTEnsuring strong adhesion, especially under varying environmental conditions, is a significant challenge in the field of coating technology. This research aims to enhance alkyd paint adhesive strength by incorporating rice husk ash-based geopolymer (GP-RHA) as a filler. Response Surface Methodology (RSM) technique was employed to systematically study the impact of GP-RHA levels on the adhesive strength of alkyd coatings under dry and wet conditions. The morphology of the coatings was analyzed using SEM-EDX. In dry pull-off test, the incorporation of GP-RHA in alkyd coatings led to an improvement in adhesive strength with the highest recorded adhesive strength of 3.9 MPa at a ratio of 41.67% wt. GP-RHA and 58.33% wt. alkyd paint. However, this higher proportion of GP-RHA resulted in the formation of a larger pore sizes hybrid coating, further causing water infiltration into the coating’s pore structure in wet pull-off test. Outcomes of this research showed the promising potential of GP-RHA filler in alkyd paint formulations to enhance adhesion. These findings offer valuable insights into the development of coatings utilizing agro-waste as a filler to improve its adhesive properties. |
|---|---|
| ISSN: | 1544-0478 1544-046X |