Influence of the Polymer Styrene Butadiene Rubber on Some of Clay Brick Properties
This research studied the improvement of clay brick durability by using two methods of treatment, the first one by coating with Styrene Butadiene Rubber (Polymer) solution and the other by submerging bricks in polymer solution for various periods. The results showed that using coating method causes...
| Format: | Article |
|---|---|
| Language: | English |
| Published: |
Unviversity of Technology- Iraq
2011-01-01
|
| Series: | Engineering and Technology Journal |
| Subjects: | |
| Online Access: | https://etj.uotechnology.edu.iq/article_27102_d0ab526423e04ca43d01868344ab235e.pdf |
| Summary: | This research studied the improvement of clay brick durability by using two methods of treatment, the first one by coating with Styrene Butadiene Rubber (Polymer) solution and the other by submerging bricks in polymer solution for various periods. The results showed that using coating method causes a slight increase in the compressive strength with a maximum percentage of 3.8% for both yellow and green brick in comparison with untreated bricks, while the compressive strength for the two types of the brick reduced when they treated using submerging method, the percentage of reduction increases by about 26% and 7% for yellow and green brick respectively at submerged period of 24 hours. The results also indicated that no efflorescence appears for all treated bricks (treated by coating and submerging methods for all periods) and a decrease in absorption with maximum percentages of 26.8% and 14.5% for yellow and green bricks respectively when the specimens submerged in polymer solution for 24 hours. All the results were compared with tested samples untreated with polymer solution. |
|---|---|
| ISSN: | 1681-6900 2412-0758 |