| Summary: | Light-emitting diodes (LEDs) have numerous advantages. However, LEDs only offer a point light source. Therefore, transforming LEDs into planar light sources is a new objective in general lighting applications. Solid light guides have strong uniformity but are marred by their material absorption characteristics and weight. Hollow light guides constitute a solution to the weight problem but exhibit poor uniformity and necessitate sacrificing efficiency to enhance uniformity. To resolve the uniformity, weight, and efficiency problems simultaneously, we propose a hollow light guide architecture involving mini-LEDs with asymmetric luminous intensity. To develop this guide module, we first optimized the aspect ratio of the cavity and then modulated the light path by using varied angles of the reflection surface on the end wall of the module. We then designed a beveled reflection surface near the mini-LEDs to further enhance uniformity. An archetype of the proposed architecture for planar light source modules had a width and depth of 51.5 and 9.95 mm, respectively. Experimental results revealed a total efficiency of 83.9% and uniformity of 92.3%. The module weight was determined to be 215 g, which was 40% lighter than that of similarly sized solid light guide modules.
|
|---|