THE INFLUENCE OF THE INGOT MOLD COOLING ON THE STRUCTURE OF SILUMINA CASTINGS AK15M3 AT VERTICAL CENTRIFUGAL CASTING

THE INFLUENCE OF THE INGOT MOLD COOLING ON THE STRUCTURE OF SILUMINA CASTINGS AK15M3 AT VERTICAL CENTRIFUGAL CASTING

Influence of ways of the mold cooling on structure of castings with diameter of 135 mm from AK15M3 silumin at vertical centrifugal casting is investigated. It is established that for production of castings with diameter 135 mm from AK15M3 silumin with high mechanical and tribotechnical properties it...

Full description

Bibliographic Details
Main Authors:	V. Yu. Stecenko, K. N. Baranov, R. V. Konovalov
Format:	Article
Language:	English
Published:	Belarusian National Technical University 2013-09-01
Series:	Litʹë i Metallurgiâ
Online Access:	https://lim.bntu.by/jour/article/view/170

Similar Items

COOLING METHOD OF SILUMINA CASTINGS AK15M3 AT VERTICAL CENTRIFUGAL CASTING
by: V. Yu. Stecenko, et al.
Published: (2013-09-01)

CONTINUOUS HORIZONTAL CASTING INTO JET CRYSTALLIZER OF INGOTS WITH DIAMETER 70 MM OF SILUMIN AK 18
by: V. Ju. Stetsenko, et al.
Published: (2009-08-01)

THE MECHANICAL CHARACTERISTICS OF THE CASTED INGOTS FROM THE STEEL OF TYPE 5XHM , RECEIVED BY CAST MOULDING INTO INGOT MOLD AFTER INDUCTION REMELT OF STEEL WASTE
by: V. N. Fedulov, et al.
Published: (2004-02-01)

TEMPERATURE STRESSES IN HARDENING UNINTERRUPTEDLY-CASTED INGOT AT CONTROLLED COOLING
by: Ju. S. Postolnik, et al.
Published: (2008-08-01)

Macrosegregation in casting and ingots
by: Fisher, K
Published: (1979)

Magnesium alloy ingots and castings
by: 8096 British Standards Institution

Computer precision simulation for titanium casting centrifugal mold filling of prescision titanium castings
by: Daming XU, et al.
Published: (2004-08-01)

INVESTIGATION OF HARDENING AND COOLING OF CHROMIC IRON CAST AT CASTING INTO CHILL, SAND AND COMBINATION MOLD
by: E. F. Baranovskiy, et al.
Published: (2010-08-01)

Specification for dezincification resistant brass die castings and ingots for die castings
by: 8096 British Standards Institution

Structural Zones in Large Static Ingot. Forecasts for Continuously Cast Brass Ingot
by: Wołczyński W., et al.
Published: (2016-09-01)

Application of the Swarm Intelligence Algorithm for Reconstructing the Cooling Conditions of Steel Ingot Continuous Casting
by: Adam Zielonka, et al.
Published: (2020-05-01)

Aluminium and magnesium alloy ingots and castings technical specification
by: 8096 British Standards Institution

Copper alloy ingots and copper and copper alloy castings
by: 8096 British Standards Institution

Reynolds Metals state-of-the-art ingot casting facility /
by: 463005 Olive, J. C., et al.

Dynamic Bath Mixing during an Ingot Casting Process
by: Xiaobin Zhou, et al.
Published: (2019-02-01)

Jet processing of direct chill cast aluminum ingots
by: Wagstaff, Samuel Robert
Published: (2017)

Studying as - cast microstructure of the cold core (CC) ingot
by: X. J. Zhang, et al.
Published: (2017-01-01)

MODELING OF ELASTIC-PLASTIC DEFORMATIONS AT CAST OF STEEL IN INGOTS OF ROUND CUT
by: A. N. Chichko, et al.
Published: (2006-05-01)

INFLUENCE OF THE CHEMICAL COMPOSITION OF CHSHG ON THE STRUCTURE OF INGOTS AT CASTING BY DIRECTIONAL HARDENIN
by: E. I. Marukovich, et al.
Published: (2005-05-01)

Heat transfer in the mold during vertical continuous casting of steel
by: E. I. Marukovich, et al.
Published: (2018-10-01)

ENVIRONMENTALLY SAFE CONTINUOUS CASTING OF HYPEREUTECTIC FINE-CRYSTALLINE SILUMIN INGOTS
by: V. Ju. Stetsenko, et al.
Published: (2010-09-01)

Technology and equipment of vertical‑stack molding for the production of castings without pattern drafts
by: V. V. Fonov, et al.
Published: (2021-12-01)

Solidified structure of thin-walled titanium parts by vertical centrifugal casting
by: Wu Shiping, et al.
Published: (2011-05-01)

The Mathematical Model of Hydrodynamics and Heat and Mass Transfer at Formation of Steel Ingots and Castings
by: Bondarenko V.I., et al.
Published: (2015-03-01)

THE INFLUENCE OF SHELLS DRAFT OF CRYSTALLIZER PAN ON ITS PERSISTENCE AND QUALITY OF THE CAST INGOT
by: A. V. Demin, et al.
Published: (2013-08-01)

Research on automatic grinding platform for rare earth ingot casting
by: X. Zhen, et al.
Published: (2024-01-01)

Minimization of Macrosegregation in DC Cast Ingots Through Jet Processing
by: Wagstaff, Samuel Robert, et al.
Published: (2016)

Nature of Segregation in the Steel Static and Brass Continuously Cast Ingots
by: W. Wołczyński
Published: (2018-12-01)

Shell molding and shell mold casting /
by: 254882 Dumond, Theodore C.
Published: (1954)

CONTROL OF CHEMICAL COMPOSITION OF CASTING BRASS IN INGOTS USED FOR MANUFACTURE OF STOP VALVES
by: A. A. Pivovarchyk, et al.
Published: (2017-10-01)

FORMATION OF WEAR-RESISTANT CHROMIUM CAST IRON CASTING INTO THE CHILL MOLD
by: E. I. Marukovich, et al.
Published: (2013-09-01)

Shell molded ductile iron castings gating and risering for vertical pouring /
by: 263900 Meriwether, H. O.

TECHNOLOGICAL FEATURES OF THE PRODUCTION OF CASTINGS OF ALUMINUM ALLOY BY CASTING INTO THE CHILL MOLD
by: M. A. Sadokha, et al.
Published: (2013-09-01)

INVESTIGATION OF PHENOMENON OF REPLENISHMENT FROM BOWL AT CASTING INTO CHILL OF THE ZINC ANODES INGOT
by: E. F. Baranovski, et al.
Published: (2005-05-01)

Procedure for inspection and testing of aluminium-base and magnesium-base ingots and castings
by: 8096 British Standards Institution

Ingots and castings of 'Y' aluminium alloy (heat treated) (suitable of pistons)
by: 8096 British Standards Institution

Specification for aluminium and aluminium alloy ingots and castings for general engineering purposes
by: 8096 British Standards Institution

Inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings
by: 8096 British Standards Institution

Control of the CET Localization in Continuously Cast Copper and Copper Alloys’ Ingots
by: P. Kwapisiński, et al.
Published: (2023-05-01)

Ventilation of molds for die casting
by: A. M. Mikhaltsov, et al.
Published: (2019-04-01)