Highly Porous Para-Aramid Aerogel as a Heterogeneous Catalyst for Selective Hydrogenation of Unsaturated Organic Compounds

A new para-aramid aerogel based on a polymer made by the reaction of terephthaloyl dichloride with 2-(4-aminophenyl)-1H-benzimidazol-5-amine (PABI) is introduced. The aerogel readily bound Pd (+2) ions and was used as a hydrogenation catalyst in some industrially actual reactions. The new material,...

Full description

Bibliographic Details
Main Authors: Sergey A. Lermontov, Nikita E. Vlasenko, Nataliya A. Sipyagina, Alena N. Malkova, Inna O. Gozhikova, Alexander E. Baranchikov, Evgeniya I. Knerelman
Format: Article
Language:English
Published: MDPI AG 2023-07-01
Series:Polymers
Subjects:
Online Access:https://www.mdpi.com/2073-4360/15/15/3206
Description
Summary:A new para-aramid aerogel based on a polymer made by the reaction of terephthaloyl dichloride with 2-(4-aminophenyl)-1H-benzimidazol-5-amine (PABI) is introduced. The aerogel readily bound Pd (+2) ions and was used as a hydrogenation catalyst in some industrially actual reactions. The new material, which did not contain p-phenylenediamine moieties, was prepared in two form factors: bulk samples and spherical pellets of 700–900 μm in diameter. Aerogels were synthesized from 1% or 5% solutions of PABI in N,N-dimethylacetamide via gelation with acetone or isopropanol and had a density of 0.057 or 0.375 g/cm<sup>3</sup> depending on the concentration of the starting PABI solution. The specific surface area of the obtained samples was 470 or 320 m<sup>2</sup>/g. Spherical pellets containing Pd were prepared from a solution of PdCl<sub>2</sub> in PABI and were used as heterogeneous catalysts for the gas-phase hydrogenation of unsaturated organic compounds presenting the main types of industrially important substrates: olefins, acetylenes, aromatics, carbonyls, and nitriles. Catalytic hydrogenation of gaseous hexene-1, hexyne-3, cyclohexene, and acrylonitrile C=C bond proceeded with a 99% conversion at ambient pressure, but the catalyst failed to reduce acetone at 150 °C and benzene and ethyl acetate even at 200 °C. The only product of acrylonitrile hydrogenation was propionitrile. The prepared catalysts showed high selectivity, which is important for the chemistry of complex organic compounds.
ISSN:2073-4360