| Summary: | The mechanical properties of steel’s inter-critically reheated coarse-grained heat-affected zone (ICR CGHAZ) directly affects the service life of machinery equipment. The hardness and toughness of ICR CGHAZ can be optimized simultaneously through tailoring microstructure where cooling rate plays a key role. In this work, the samples with different cooling rates was prepared using thermal simulation. The granite bainite (GB), bainite ferrite (BF) and MA were formed at a 1 °C/s (CR1) cooling rate, while BF and MA were formed at 10 °C/s (CR2) and 30 °C/s (CR3) cooling rates. With the increase of cooling rate, the effective grain size decreased and the number of hard phases increased, resulting in monotonic increase of hardness (260HV3, 298HV3 and 323HV3). CR1 had sparsely distributed coarse slender MA and CR3 possessed tail-head connected MA along PAGBs, which was detrimental to toughness. Therefore, CR2 possessed the best toughness(25J). The microstructural evolution mechanism of ICR CGHAZ with different cooling rates is investigated, corresponding hardening and toughening mechanisms are discussed.
|
|---|