| Summary: | An unstable discharge rate occurs during dry fine powder discharge from a hopper because of the significant two-phase solid/gas interactions that occur in powder flows. In addition, the air bubble phenomenon may occur in a silo during fine powder discharge. In this study, we conducted experiments using a semi-conical dual-structure hopper, and examined the effects on the hopper internal flow structure, cavity fluid pressure, pressure inside the airtight cavity section, and the powder discharge rate when changes are made in the position of the supplied air injection port and the solenoid valve open/close timing. From the experimental results, it was confirmed that an appropriate pressure supply port position exists, and the change in expansion/contraction of the flexible container due to air vibration is determined by the balance between the amount of air inserted and the amount of air discharged, and does not affect the presence or absence of powder so much. Furthermore, as the pressure value in the airtight void is directly related to the change in the expansion and contraction of the flexible container, the maximum amplitude value of the pressure in the airtight void can be kept high and constant at the time of opening and closing the solenoid valve.
|
|---|