| Summary: | To accurately measure the critical dimensions of flat parts using machine vision, an inspection method based on the adaptive chord inclination angle progressively screening the segmentation points of graphic elements was proposed in this study. The method doubled the size of the part image using bicubic interpolation, extracted the single-pixel contour with more detailed information, and designed an adaptive step size to obtain the front and back chord inclination angles of the contour. The method of complementing the front and back chord inclination angles was employed to avoid the negative effects of contour jaggedness, thereby obtaining the contour segmentation points after the initial screening. The segmentation points obtained in the initial sieving were divided into different point clusters according to the distance, and the contour, which was segmented by two segmentation points in different point clusters, was fitted using the least squares. The fitting results were evaluated, and all the fitting results were selected using the improved non-maximum suppression (NMS) algorithm to obtain the precisely selected segmentation points of the graphic elements. Consequently, the segmented individual graphic elements were fitted with the segmentation points as constraints to obtain the key dimensions of the closed part. The developed method could accurately find the contour segmentation points, and the relative error was less than 0.6%.
|
|---|