Study on the deformation mechanism of Ti–10Mo–1Fe solid-solution alloys with different cooling rates
The phase composition before deformation is an important factor affecting the deformation mechanism of titanium alloy at room-temperature. In practical production, the initial phase composition can be greatly controlled by changing the solution cooling mode of the alloy, thus affecting the deformati...
Main Authors: | , , , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Elsevier
2023-03-01
|
Series: | Journal of Materials Research and Technology |
Subjects: | |
Online Access: | http://www.sciencedirect.com/science/article/pii/S2238785423003848 |
_version_ | 1797858774598287360 |
---|---|
author | Beite Gao Qingjuan Wang Wei Wang Shewei Xin Yaling Sun Kuaishe Wang |
author_facet | Beite Gao Qingjuan Wang Wei Wang Shewei Xin Yaling Sun Kuaishe Wang |
author_sort | Beite Gao |
collection | DOAJ |
description | The phase composition before deformation is an important factor affecting the deformation mechanism of titanium alloy at room-temperature. In practical production, the initial phase composition can be greatly controlled by changing the solution cooling mode of the alloy, thus affecting the deformation mechanism and mechanical properties of the alloy to a certain extent. Therefore, the study of the effect of solution cooling rate on the deformation mechanism at room-temperature plays an important role in regulating the properties of the alloy. Through room-temperature compression experiments, the microstructure evolution and room-temperature plastic deformation mechanism of Ti–10Mo–1Fe near β-type alloys with different cooling rates after solution treatment at 870 °C were studied in this paper. The results show that the main room-temperature deformation mechanism of the Ti–10Mo–1Fe alloy under rapid cooling conditions (water-cooled) was the {332}<113> twins and stress-induced orthorhombic martensite α″ phase. In addition, a few {112}<111> twins were observed. The plastic deformation mechanism at room temperature under moderate cooling conditions (air-cooled) was primarily {332}<113> twins and dislocation slip. Small numbers of {112}<111> twins were also observed. Under slow cooling conditions (furnace cooling), no new phases are formed during the deformation process, and the plastic deformation mechanism at room temperature is dislocation slip. |
first_indexed | 2024-04-09T21:18:50Z |
format | Article |
id | doaj.art-d0c0dc735ba64e2c8036c4568ccc83c2 |
institution | Directory Open Access Journal |
issn | 2238-7854 |
language | English |
last_indexed | 2024-04-09T21:18:50Z |
publishDate | 2023-03-01 |
publisher | Elsevier |
record_format | Article |
series | Journal of Materials Research and Technology |
spelling | doaj.art-d0c0dc735ba64e2c8036c4568ccc83c22023-03-28T06:48:49ZengElsevierJournal of Materials Research and Technology2238-78542023-03-012352215229Study on the deformation mechanism of Ti–10Mo–1Fe solid-solution alloys with different cooling ratesBeite Gao0Qingjuan Wang1Wei Wang2Shewei Xin3Yaling Sun4Kuaishe Wang5School of Metallurgical Engineering, Xi'an University of Architecture & Technology, Xi'an, 710055, ChinaSchool of Metallurgical Engineering, Xi'an University of Architecture & Technology, Xi'an, 710055, China; Corresponding author.School of Metallurgical Engineering, Xi'an University of Architecture & Technology, Xi'an, 710055, ChinaTitanium Alloy Institute, Northwest Institute for Nonferrous Metal Research, Xi'an, 710016, ChinaSchool of Metallurgical Engineering, Xi'an University of Architecture & Technology, Xi'an, 710055, ChinaSchool of Metallurgical Engineering, Xi'an University of Architecture & Technology, Xi'an, 710055, ChinaThe phase composition before deformation is an important factor affecting the deformation mechanism of titanium alloy at room-temperature. In practical production, the initial phase composition can be greatly controlled by changing the solution cooling mode of the alloy, thus affecting the deformation mechanism and mechanical properties of the alloy to a certain extent. Therefore, the study of the effect of solution cooling rate on the deformation mechanism at room-temperature plays an important role in regulating the properties of the alloy. Through room-temperature compression experiments, the microstructure evolution and room-temperature plastic deformation mechanism of Ti–10Mo–1Fe near β-type alloys with different cooling rates after solution treatment at 870 °C were studied in this paper. The results show that the main room-temperature deformation mechanism of the Ti–10Mo–1Fe alloy under rapid cooling conditions (water-cooled) was the {332}<113> twins and stress-induced orthorhombic martensite α″ phase. In addition, a few {112}<111> twins were observed. The plastic deformation mechanism at room temperature under moderate cooling conditions (air-cooled) was primarily {332}<113> twins and dislocation slip. Small numbers of {112}<111> twins were also observed. Under slow cooling conditions (furnace cooling), no new phases are formed during the deformation process, and the plastic deformation mechanism at room temperature is dislocation slip.http://www.sciencedirect.com/science/article/pii/S2238785423003848β titanium alloyTi–10Mo–1FeCooling ratesPlastic deformation mechanismMicrostructure evolution |
spellingShingle | Beite Gao Qingjuan Wang Wei Wang Shewei Xin Yaling Sun Kuaishe Wang Study on the deformation mechanism of Ti–10Mo–1Fe solid-solution alloys with different cooling rates Journal of Materials Research and Technology β titanium alloy Ti–10Mo–1Fe Cooling rates Plastic deformation mechanism Microstructure evolution |
title | Study on the deformation mechanism of Ti–10Mo–1Fe solid-solution alloys with different cooling rates |
title_full | Study on the deformation mechanism of Ti–10Mo–1Fe solid-solution alloys with different cooling rates |
title_fullStr | Study on the deformation mechanism of Ti–10Mo–1Fe solid-solution alloys with different cooling rates |
title_full_unstemmed | Study on the deformation mechanism of Ti–10Mo–1Fe solid-solution alloys with different cooling rates |
title_short | Study on the deformation mechanism of Ti–10Mo–1Fe solid-solution alloys with different cooling rates |
title_sort | study on the deformation mechanism of ti 10mo 1fe solid solution alloys with different cooling rates |
topic | β titanium alloy Ti–10Mo–1Fe Cooling rates Plastic deformation mechanism Microstructure evolution |
url | http://www.sciencedirect.com/science/article/pii/S2238785423003848 |
work_keys_str_mv | AT beitegao studyonthedeformationmechanismofti10mo1fesolidsolutionalloyswithdifferentcoolingrates AT qingjuanwang studyonthedeformationmechanismofti10mo1fesolidsolutionalloyswithdifferentcoolingrates AT weiwang studyonthedeformationmechanismofti10mo1fesolidsolutionalloyswithdifferentcoolingrates AT sheweixin studyonthedeformationmechanismofti10mo1fesolidsolutionalloyswithdifferentcoolingrates AT yalingsun studyonthedeformationmechanismofti10mo1fesolidsolutionalloyswithdifferentcoolingrates AT kuaishewang studyonthedeformationmechanismofti10mo1fesolidsolutionalloyswithdifferentcoolingrates |