MODELING OF THE MECHANISM OF ACTION OF EPILAME FILM IN THE PROCESS OF PROCESSING
The article discusses the mechanism of action of the epilam film during the operation of epilated drills and the influence of cutting conditions, processing conditions on their condition. Tribological tests were carried out using a special installation, where the test conditions are close to the...
| Main Authors: | , , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
The Association of Intellectuals for the Development of Science in Serbia – “The Serbian Academic Center”
2022-03-01
|
| Series: | Advanced Engineering Letters |
| Subjects: | |
| Online Access: | https://www.adeletters.com/journals/2022/ADEL0002.pdf |
| Summary: | The article discusses the mechanism of action of the epilam film during the
operation of epilated drills and the influence of cutting conditions,
processing conditions on their condition. Tribological tests were carried out
using a special installation, where the test conditions are close to the
conditions characteristic of the drilling process. Based on the results of the
experiment, it was found that the effectiveness of epilam film directly
depends on the cutting speed, which determines the temperature in the
contact zone. Research has shown that use of oil-based LCTF MR-7 (МР-7)
has the best effect on the state of epilam coating. |
|---|---|
| ISSN: | 2812-9709 |