Optimization and Kinetic Study of Treating Dye-Contaminated Wastewater Using Bio-Composite Synthesized from Natural Waste

The main objective of the present research project was to investigate the possibility of using low cost, eco-friendly, and easily available adsorbents, such as mint biomass and marble stone waste, for the removal of dyes, DRIM blue HS-RL and DRIM black ep-B, from wastewater using an efficient proced...

Full description

Bibliographic Details
Main Authors: Mana Iqbal, Muhammad Asif Hanif, Umer Rashid, Muhammad Idrees Jilani, Fahad A. Alharthi, Elham Ahmed Kazerooni
Format: Article
Language:English
Published: MDPI AG 2023-06-01
Series:Separations
Subjects:
Online Access:https://www.mdpi.com/2297-8739/10/7/386
Description
Summary:The main objective of the present research project was to investigate the possibility of using low cost, eco-friendly, and easily available adsorbents, such as mint biomass and marble stone waste, for the removal of dyes, DRIM blue HS-RL and DRIM black ep-B, from wastewater using an efficient procedure, which is adsorption. Nine different combinations of these adsorbents were prepared with and without modification using sodium metasilicate and potassium ferricyanide. Spectroscopic analysis was carried out to investigate the λ<sub>max</sub> of the dyes. Adsorbent nanocomposites were characterized using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and zeta (ζ) potential. Adsorption equilibrium studies were investigated by determining the adsorption at the following conditions: initial dye concentrations (5–50 ppm), adsorbent doses (0.005–0.5 g), contact times (15–240 min), temperatures (30–70 °C) and pH (5–10). Of all the nine adsorbents, MTPF showed the maximum adsorption capacity at 50 ppm initial dye concentration, 0.005 g dosage of adsorbent and 240 min contact time for both dyes. DRIM Blue HS-RL was adsorbed efficiently at 6 pH and temperature 60 °C and DRIM black ep-B was adsorbed at pH 5 and temperature 50 °C by MTPF (mint–tawera composite treated with potassium ferricyanide). Among the various adsorption isotherms (Langmuir, Dubinin–Radushkevich, Freundlich, Herkin–Jura, and Temkin isotherms), some adsorbent followed the Freundlich isotherm while the others followed the Langmuir isotherm. The best-fit model was decided based on their high R<sup>2</sup> value and agreement between q<sub>e</sub> calculated from isotherms and those obtained experimentally. At equilibrium concentration, application of kinetic models (pseudo-first-order, and pseudo-second-order) revealed that the best-fit model was pseudo-second-order kinetic model for both dyes, as their R<sup>2</sup> > 0.9, and q<sub>e</sub> calculated was close to q<sub>e</sub> obtained experimentally.
ISSN:2297-8739