NX CAM post processing errors: Machine data file generator vs. post builder
Replacing or upgrading software packages requires a detailed analysis and testing. This is especially important for software modules that are part of the production process. Machining of free-form surfaces always requires using of a five-axis milling machine. Tool path post-processing for these mach...
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
University of Belgrade - Faculty of Mechanical Engineering, Belgrade
2016-01-01
|
| Series: | FME Transactions |
| Subjects: | |
| Online Access: | https://scindeks-clanci.ceon.rs/data/pdf/1451-2092/2016/1451-20921602159Z.pdf |
| Summary: | Replacing or upgrading software packages requires a detailed analysis and testing. This is especially important for software modules that are part of the production process. Machining of free-form surfaces always requires using of a five-axis milling machine. Tool path post-processing for these machines always attracts special attention. The most important part of the postprocessor is implemented IKS (Inverse Kinematic Solver). Implemented IKS in the postprocessor must accurately describe the kinematics of milling machine in the production plant. Military Technical Institute performed parallel testing of two postprocessing modules of CAD/CAM system Siemens PLM NX: and old GPM (Graphics Postprocessor Module and a new module MOM (Manufacturing Output Manager). Complete analysis was sent to the NX support center and application engineers confirmed that the old and new postprocessors do not behave identically. The paper describes in detail the analysis and explains the solution of the presented problem. |
|---|---|
| ISSN: | 1451-2092 2406-128X |