| Summary: | The power generation capability of an electromagnetic vibration energy harvester augmented with an additional coil was investigated and compared with that of a standard single coil electromagnetic energy harvester. A single degree of freedom model and the corresponding equivalent electric circuit were employed for the analysis of the standard and of the augmented harvesters. The harvester model was validated by means of an accurate experimental characterization of a commercial electromagnetic harvester, i.e., the model-D by ReVibe. The electric circuits for the standard and for the augmented harvesters were implemented by electronic components and experimentally tested to determine the maximum power they are able to generate in four test conditions. Results from simulations and from experiments showed significant improvement of the power extraction performance exhibited by the double coil energy harvester, particularly at frequencies lower than the harvester mechanical resonance frequency.
|
|---|