| Summary: | This study focuses on the preparation of Al-based hybrid composites using AA7475 as the main alloy reinforced with two materials, ZrO2 and SiC. The combination of stir-squeeze processing techniques was employed to create various specimens by varying four parameters: Stir-speed, Stir-time, reinforcements, and squeeze pressure. Taguchi design was utilized to generate specimens for analyzing their mechanical properties, specifically tensile strength, hardness, and porosity.The results indicated that the highest porosity (4.44%) was observed in the L16 test, with a combination of 700rpm stir speed, 25 mins stir time, 2wt% reinforcements, and 80MPa squeeze pressure. On the other hand, the lowest porosity (2.61%) was found in the L7 test, with 800rpm stir speed, 30 mins stir time, 2wt% reinforcements, and 100 MPa squeeze pressure.Regarding tensile strength (UTS), the maximum value (285.23MPa) was achieved in the L13 experiment, while the minimum value (187.58 MPa) was observed in the L1 experiment. This variation in UTS can be attributed to the applied load, the strengthening effect of the reinforcements, and the grain size of SiC.
|
|---|