Effect of Workpiece Slenderness on the Numerical Flow Lines Distribution in the Cross-Section of a Circular-Symmetric Part Hot Die Forged with a Hammer
The paper presents the results of computer simulations of the steam-air hammer driven die forging process of circular-symmetrical forgings at different slenderness values of the billet (range from 1.5 to 2.8). The slenderness of the workpiece is defined as the ratio of the length of the billet to it...
Main Author: | Tomasz Miłek |
---|---|
Format: | Article |
Language: | English |
Published: |
Lublin University of Technology
2022-12-01
|
Series: | Advances in Sciences and Technology |
Subjects: | |
Online Access: | http://www.astrj.com/Effect-of-Workpiece-Slenderness-on-the-Numerical-Flow-Lines-Distribution-in-the-Cross,155941,0,2.html |
Similar Items
-
Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts
by: Łukasz Poloczek, et al.
Published: (2020-12-01) -
Energy-Saving Hot Open Die Forging Process of Heavy Steel Forgings on an Industrial Hydraulic Forging Press
by: Ryszard Dindorf, et al.
Published: (2020-04-01) -
Case Study of the Effect of Precoating on the Decarburization of the Surface Layer of Forged Parts during the Hot Die Forging Process
by: Paweł Widomski, et al.
Published: (2021-01-01) -
Analysis and Improvement of an Industrial Process of Hot Die Forging of an Elongated Forging Tipped with a Joggle with the Use of Numerical Simulation Results
by: Marek Robert Hawryluk, et al.
Published: (2023-04-01) -
Possibilities of Measuring and Detecting Defects of Forged Parts in Die Hot-Forging Processes
by: Marek Hawryluk, et al.
Published: (2023-12-01)