System Configurations and Operational Concepts for Highly Efficient Utilization of Power-to-Heat in A-CAES
The increasing share of renewable energies requires the installation of large-scale electricity storage capacities in addition to grid expansion. Significant contribution to reach this goal is provided by adiabatic compressed air energy storage power plants (A-CAES), key elements in future electrici...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2019-03-01
|
| Series: | Applied Sciences |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2076-3417/9/7/1317 |
| _version_ | 1818007688705998848 |
|---|---|
| author | Volker Dreißigacker Sergej Belik |
| author_facet | Volker Dreißigacker Sergej Belik |
| author_sort | Volker Dreißigacker |
| collection | DOAJ |
| description | The increasing share of renewable energies requires the installation of large-scale electricity storage capacities in addition to grid expansion. Significant contribution to reach this goal is provided by adiabatic compressed air energy storage power plants (A-CAES), key elements in future electricity transmission systems. This technology allows efficient, local zero-emission electricity storage on the basis of compressed air in underground caverns in combination with thermal energy storage systems and, in contrast to pumped storage power plants (PSPP), it demands no overground geological requirements. Despite the achieved success of A-CAES systems in terms of efficiency and cost, further improvements in dynamics and flexibility are needed. One promising solution to fulfil these dynamic requirements is based on the integration of an additional power-to-heat element (P2H) operating during the charging periods. This modification allows increased power plant flexibility and further cost reductions due to increased thermal storage densities but is simultaneously associated with concept-dependent decreasing total round trip efficiencies. For the identification of suitable configurations, adequate concepts must be elaborated, and the influence on round trip efficiency as well as on cost reduction potential must be investigated. For this purpose, a system model for a two-stage A-CAES configuration is established and used for large simulation studies related to P2H locations and power, thermal energy storage systems, and central process variables. Therefore, time-efficient model reductions with well-justified assumptions are conducted, offering a simplified transient implementation of thermal energy options in the system simulation. On the basis of a promising P2H configuration including high potentials for cost reduction and moderate losses in round trip efficiency, an alternative concept is presented offering high exergetic utilization and additional cost reductions, which can be treated as a base for upgrading the existing CAES power plants and for modifying operational concepts. |
| first_indexed | 2024-04-14T05:18:56Z |
| format | Article |
| id | doaj.art-e06a4a65e9eb472ca24ac7d8fe7c98ac |
| institution | Directory Open Access Journal |
| issn | 2076-3417 |
| language | English |
| last_indexed | 2024-04-14T05:18:56Z |
| publishDate | 2019-03-01 |
| publisher | MDPI AG |
| record_format | Article |
| series | Applied Sciences |
| spelling | doaj.art-e06a4a65e9eb472ca24ac7d8fe7c98ac2022-12-22T02:10:17ZengMDPI AGApplied Sciences2076-34172019-03-0197131710.3390/app9071317app9071317System Configurations and Operational Concepts for Highly Efficient Utilization of Power-to-Heat in A-CAESVolker Dreißigacker0Sergej Belik1German Aerospace Center, Institute of Engineering Thermodynamics, Pfaffenwaldring 38-40, 70569 Stuttgart, GermanyGerman Aerospace Center, Institute of Engineering Thermodynamics, Pfaffenwaldring 38-40, 70569 Stuttgart, GermanyThe increasing share of renewable energies requires the installation of large-scale electricity storage capacities in addition to grid expansion. Significant contribution to reach this goal is provided by adiabatic compressed air energy storage power plants (A-CAES), key elements in future electricity transmission systems. This technology allows efficient, local zero-emission electricity storage on the basis of compressed air in underground caverns in combination with thermal energy storage systems and, in contrast to pumped storage power plants (PSPP), it demands no overground geological requirements. Despite the achieved success of A-CAES systems in terms of efficiency and cost, further improvements in dynamics and flexibility are needed. One promising solution to fulfil these dynamic requirements is based on the integration of an additional power-to-heat element (P2H) operating during the charging periods. This modification allows increased power plant flexibility and further cost reductions due to increased thermal storage densities but is simultaneously associated with concept-dependent decreasing total round trip efficiencies. For the identification of suitable configurations, adequate concepts must be elaborated, and the influence on round trip efficiency as well as on cost reduction potential must be investigated. For this purpose, a system model for a two-stage A-CAES configuration is established and used for large simulation studies related to P2H locations and power, thermal energy storage systems, and central process variables. Therefore, time-efficient model reductions with well-justified assumptions are conducted, offering a simplified transient implementation of thermal energy options in the system simulation. On the basis of a promising P2H configuration including high potentials for cost reduction and moderate losses in round trip efficiency, an alternative concept is presented offering high exergetic utilization and additional cost reductions, which can be treated as a base for upgrading the existing CAES power plants and for modifying operational concepts.https://www.mdpi.com/2076-3417/9/7/1317A-CAESpower-to-heatthermal energy storage systemsoperational concepts |
| spellingShingle | Volker Dreißigacker Sergej Belik System Configurations and Operational Concepts for Highly Efficient Utilization of Power-to-Heat in A-CAES Applied Sciences A-CAES power-to-heat thermal energy storage systems operational concepts |
| title | System Configurations and Operational Concepts for Highly Efficient Utilization of Power-to-Heat in A-CAES |
| title_full | System Configurations and Operational Concepts for Highly Efficient Utilization of Power-to-Heat in A-CAES |
| title_fullStr | System Configurations and Operational Concepts for Highly Efficient Utilization of Power-to-Heat in A-CAES |
| title_full_unstemmed | System Configurations and Operational Concepts for Highly Efficient Utilization of Power-to-Heat in A-CAES |
| title_short | System Configurations and Operational Concepts for Highly Efficient Utilization of Power-to-Heat in A-CAES |
| title_sort | system configurations and operational concepts for highly efficient utilization of power to heat in a caes |
| topic | A-CAES power-to-heat thermal energy storage systems operational concepts |
| url | https://www.mdpi.com/2076-3417/9/7/1317 |
| work_keys_str_mv | AT volkerdreißigacker systemconfigurationsandoperationalconceptsforhighlyefficientutilizationofpowertoheatinacaes AT sergejbelik systemconfigurationsandoperationalconceptsforhighlyefficientutilizationofpowertoheatinacaes |