| Summary: | The excellent adsorption properties of clay minerals make the optimization of heavy metal removal the subject of numerous research projects. In the present study, ASLAVITAL cosmetic clay (ACC) powder was applied for the removal of Cd<sup>2+</sup> from water. The main deposit of ACC clay is the Pădurea Craiului Mountains in Romania. A wide range of morpho-structural approaches (SEM, EDX, FTIR, Raman, XRD) were used to characterize the morphology and elemental composition of the adsorbent. As expected for clay minerals, Al (Wt(%) = 11.4 ± 0.9) and Si (Wt(%) = 13.7 ± 1.4) are the main constituents of ACC. After adsorption, Wt(%) = 0.2 ± 0.01 Cd<sup>2+</sup> was detected in the sample. As proved before, the initial metal concentration is the primary influencing factor; therefore, batch adsorption of 10–160 mg/L Cd<sup>2+</sup> was investigated. After 190 min, an efficiency of 99% was reached, and the quantity in equilibrium increased from 1–8 mg/g. The best fit in linear form was obtained for the Langmuir II. model, where R<sup>2</sup> = 0.954 (R<sub>L</sub> = 0.037–0.027). Based on linear isotherm models, physical bonds formed between ACC and Cd<sup>2+</sup> during the favorable adsorption. For the non-linear fits, the Liu model proved to be the best R<sup>2</sup> = 0.965, χ<sup>2</sup> = 1.101. Pseudo-II-order kinetic model described the experimental data R<sup>2</sup> = 0.988–0.999; q<sub>exp</sub> and q<sub>calc</sub> were almost identical (the differences ranged 0.03–0.34).
|
|---|