| Summary: | This study investigated the effects of reinforcing pure copper with hybrid B<sub>4</sub>C and Si<sub>3</sub>N<sub>4</sub> nanoparticles on the mechanical and physical properties of the nanocomposite matrix. The composite matrix was prepared using the powder metallurgy (PM) method, allowing uniform nanoparticle dispersion within the copper matrix. The PM method was a practical approach for achieving a homogeneous and good dispersion of the reinforcing particles in the matrix while controlling the porosity and improving the microstructure of the fabricated composite matrix. The addition of B<sub>4</sub>C and Si<sub>3</sub>N<sub>4</sub> are both very hard and dense materials. When added to a material, they can fill voids and reduce porosity. This can lead to significant improvements in the material’s mechanical properties. The study found that adding hybrid B<sub>4</sub>C and Si<sub>3</sub>N<sub>4</sub> nanoparticles enhanced the microhardness and mechanical properties of the nanocomposites. The improvements in the mechanical and physical properties of such composites containing 5% B<sub>4</sub>C were 21.6% and 18.4% higher than the copper base alloy. The findings suggest that including ceramic particles is a viable strategy for enhancing the mechanical characteristics of copper in its pure form. For example, adding 5% B<sub>4</sub>C particles to copper resulted in a 23% increase in Young’s modulus of the material while reducing electrical conductivity by 4.6%. On the other hand, the hybrid composite Cu/5%B<sub>4</sub>C + 2.5%Si<sub>3</sub>N<sub>4</sub> showed a 32% improvement in Young’s modulus and 71% in the microhardness value compared to the base metal. This makes it a promising option for various engineering applications, such as high-performance electrical contacts and bearings.
|
|---|