SIMULATION OF AQUIFER REMEDIATION FROM LOW-PERMEABLE LENSES BY BACK-DIFFUSION PHENOMENON
Fluid flow in a dual permeable medium (DPM) is essential in solute transport in mining and aquifer studies. In this paper, water flushing into a contaminated DPM containing fine-grained lenses with different geometries was investigated with the Lattice Boltzmann Method (LBM). The LBM model used in t...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Faculty of Mining, Geology and Petroleum Engineering
2021-01-01
|
| Series: | Rudarsko-geološko-naftni Zbornik |
| Subjects: | |
| Online Access: | https://hrcak.srce.hr/file/386702 |
| Summary: | Fluid flow in a dual permeable medium (DPM) is essential in solute transport in mining and aquifer studies. In this paper, water flushing into a contaminated DPM containing fine-grained lenses with different geometries was investigated with the Lattice Boltzmann Method (LBM). The LBM model used in this study was D2Q9 with a relaxation time of 1, a cohesion value of 3 for a fluid density of 1 (mu.Lu-3). The saturated fluid in the DPM was a contaminant that usually stays in low permeable lenses and after flushing, it is leaked into the porous medium by a second fluid (water). This phenomenon is predominant when the displacing fluid has a lower concentration than the contaminated fluid. Diffusion and advection are the main mechanisms that control fluid flow in the porous medium. The results of the simulations showed: (1) advection controlled solute transport through the flushing phase, and back-diffusion occurred after the change in phase; (2) the lenses’ geometry influenced the fluid flow pattern and the remediation process. As a result, aquifer remediation strategies based on the lenses’ geometry and their permeability can help us select the appropriate environmental protection. |
|---|---|
| ISSN: | 0353-4529 1849-0409 |