| Summary: | Celeriac is a good source of fibre, trace minerals, and phenolic compounds; it has a pleasant aroma but is a perishable material, prone to discolouration. This research investigated the optimisation of the quality and energy demand in hot-air dried celeriac slices. The experiment utilised the I-optimal design of response surface methodology with 30 experiment runs. Pre-drying treatments (blanching at 85 °C, three minutes; dipping in 1% citric acid solution, three minutes; no pre-drying treatment), drying temperatures (50, 60, and 70 °C), air velocities (1.5, 2.2, and 2.9 m/s), and thickness (three-, five, and seven-mm) were applied. The drying conditions affected drying time significantly (<i>p</i> < 0.0001). The model by Midilli and others and the logarithmic model fitted best with celeriac slices drying kinetics. Blanched samples had a higher Δ<i>E</i>*<i><sub>ab</sub></i> (total colour difference) and <i>BI</i> (browning index) but lower <i>WI</i> (whiteness index) than samples with other pre-drying treatments. The rehydration ratio decreased with the increase of sample thickness and blanching (<i>p</i> < 0.0001). A quadratic model described the specific energy consumption (<i>E<sub>s</sub></i>) best. The dried samples compared with fresh samples had increased antioxidant activity but decreased total phenolic compound value. The optimisation solution chosen was 58 °C drying temperature, 2.9 m/s air velocity, and 4.6 mm sample thickness with acid pre-drying treatment.
|
|---|