URANIUM CONCENTRATIONS MEASURMENTS IN A PRIMARY MATERIALS FOR GLASS MANFUCTURING USING NUCLEAR TRACE REAGENT(PM-355)
ABSTRACT:In this study , the concentrations of uranium were measured by using 36 samples equally distributed on the raw materials taken from the Glass & Ceramic Company in AL-Anbar Governorate. These samples were measured by using fission tracks registration in (PM-355) track detector that cause...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
University of Anbar
2012-06-01
|
| Series: | مجلة جامعة الانبار للعلوم الصرفة |
| Online Access: | https://juaps.uoanbar.edu.iq/article_15459_f5e73c5fc55fb54ed0e341152f062c77.pdf |
| Summary: | ABSTRACT:In this study , the concentrations of uranium were measured by using 36 samples equally distributed on the raw materials taken from the Glass & Ceramic Company in AL-Anbar Governorate. These samples were measured by using fission tracks registration in (PM-355) track detector that caused by the bombardment of (U) with thermal neutrons from (241 Am-Be) neutron source that has flux of (5 ×103 n cm-2 s-1). The values of the concentrations were calculated by a comparison with standard samples. The results shows that the uranium concentrations were as fallow : sodium sulphate (1.564- 2.253 ppm) , Flint (1.797-1.979 ppm), Sand (1.964-2.518 ppm), sodium carbonate (1.153 – 1.734 ppm ) , Limston (1.197 -1.797ppm) , and Dolomite (1.481 –2.047 |
|---|---|
| ISSN: | 1991-8941 2706-6703 |