| Summary: | Conservation tillage technology can reduce wind erosion and soil erosion, improve soil fertility, avoid straw burning and relieve ecological pressure. It is an important measure to achieve sustainable agricultural development. In northeast China, there is a large amount of straw covering the ground after the corn machine harvest, which can easily lead to the blockage of the soil-touching parts during no-tillage seeding, affecting sowing quality and crop yield. In order to solve the above problems, the clearing and covering of a minimum-tillage planter for corn stubble was developed. The machine can complete multiple processes, such as seedbed preparation, seeding, fertilization, covering and suppression, straw covering, etc., in a single entity. This paper focuses on the design of the straw cleaning device and uses discrete element method software (EDEM 2018, Altair Engineering, Troy, MI, USA) to establish the straw cleaning device–straw–soil discrete element simulation model. The quadratic-regression orthogonal center-of-rotation combination test method is used to optimize the parameter combination of the machine, using the operating speed, the speed of the knife roller and the penetration depth of the knife as the test factors and using the rate of cleaning straw and the equivalent power consumption as the evaluation index. The results show that each factor has a significant influence on the performance evaluation indices, and the order of influence of each factor on the rate of cleaning straw is operation speed > penetration depth of knife > speed of knife roller, and the order of influence of each factor on the equivalent power consumption is penetration depth of knife > speed of knife roller > operation speed. The optimal combination of parameters is a 5.5–6.2 km/h operation speed, a 500 rpm speed of the knife roller, a 40 mm penetration depth of the knife, a straw-cleaning rate of more than 90% and an equivalent power consumption of less than 8 kW. This study provides technical and equipment support for the promotion of conservation tillage technology in Northeast China.
|
|---|