| Summary: | There is an increasing interest in properly representing local driving patterns. The most frequent alternative to describe driving patterns is through a representative time series of speed, denominated driving cycle (DC). However, the DC duration is an important factor in achieving DC representativeness. Long DCs involve high testing costs, while short DCs tend to increase the uncertainty of the fuel consumption and tailpipe emissions results. There is not a defined methodology to establish the DC duration. This study aims to study the effect of different durations of the DCs on their representativeness. We used data of speed, time, fuel consumption, and emissions obtained by monitoring for two months the regular operation of a fleet of 15 buses running in two flat urban regions with different traffic conditions. Using the micro-trips method, we constructed DCs with a duration of 5, 10, 15, 20, 25, 30, 45, 60, and 120 min for each region. For each duration, we repeated the process 500 times in order to establish the trend and dispersion of the DC characteristic parameters. The results indicate that to obtain driving pattern representativeness, the DCs must last at least 25 min. This duration also guarantees the DC representativeness in terms of energy consumption and tailpipe emissions.
|
|---|