| Summary: | A kinetic model for the reactions between the low-fluoride slag CaF2–CaO–Al2O3–MgO–Li2O–TiO2 and Incoloy 825 alloy was proposed based on the two-film theory. The applicability of the model was verified to predict the variation of components in the slag–metal reaction process. The results show that the controlling step of the reaction 4[Al] + 3(TiO2) = 3[Ti] + 2(Al2O3) is the mass transfer of Al and Ti in the liquid alloy and the controlling step of the reactions 4[Al] + 3(SiO2) = 3[Si] + 2(Al2O3) and [Si] + (TiO2) = [Ti] + (SiO2) is the mass transfer of SiO2 in the molten slag. With increasing TiO2 content in the slag from 3.57% to 11.27%, the Al content in the alloy decreased whereas the Ti content increased gradually. The Si content continued to decrease during the slag–metal reaction. Soluble oxygen in the alloy reacts with Al, Ti, and Si, resulting in a decrease of the oxygen content in the alloy. The variations of TiO2 content were in good agreement with the calculated results by the kinetic model whereas the measured results of Al2O3 and SiO2 in the slag were lower than the calculated results, which is mainly due to the volatilization of fluoride.
|
|---|