Growth Mechanism of Eutectic Si in Super-Gravity Solidified Al-Si Alloy during Annealing

Growth Mechanism of Eutectic Si in Super-Gravity Solidified Al-Si Alloy during Annealing

Herein, we report that the influence of annealing time on the microstructure and mechanical properties of Al-14.5Si alloys solidified under a super-gravity field. The results indicate that the coarsening of metastable eutectic Si and formation of precipitated Si could be observed at the early stage...

Full description

Bibliographic Details
Main Authors:	Yuehui Lu, Chuandong Wu, Hao Wu, Jiamin Wang, Yin Su, Zhanghua Gan, Jing Liu
Format:	Article
Language:	English
Published:	MDPI AG 2023-04-01
Series:	Crystals
Subjects:	super-gravity solidification Al alloys annealing
Online Access:	https://www.mdpi.com/2073-4352/13/4/684

Similar Items

Influence of Annealing Time on Microstructure and Mechanical Properties of Al-14.5Si Alloy Prepared by Super-Gravity Solidification and Cold-Rolling
by: Zhanghua Gan, et al.
Published: (2022-08-01)

Influence of super-gravity coefficient on spatial distribution of solidification structure in Al-14.5Si alloys
by: Zhanghua Gan, et al.
Published: (2021-11-01)

Effect of strontium and solidifi cation rate on eutectic grain structure in an Al-13 wt% Si alloy
by: Liao Hengcheng, et al.
Published: (2009-08-01)

Selective Etching of Sr-Modified and Directionally Solidified Industrial Al–Si Eutectic Alloys for Fabricating Fibrous Eutectic Si
by: Jianjun Gao, et al.
Published: (2021-12-01)

Eutectic alloy solidification /
by: Chadwick, G. A. (Geoffrey Allan)
Published: (1963)

Chill modification in Al-Si-Sb eutectic alloys /
by: 183648 Ali Ourdjini, et al.
Published: (1995)

Review on Eutectic-Type Alloys Solidified under Static Magnetic Field
by: Hao Cai, et al.
Published: (2023-05-01)

Microstructure evolution in directionally solidifying Cu-17 at.% Al eutectic alloy
by: Małgorzata Perek-Nowak, et al.
Published: (2023-03-01)

Grain refinement driven by recrystallization after annealing nonequilibrium solidification microstructure of a deeply undercooled nickel alloy
by: Xiaolong Xu, et al.
Published: (2023-07-01)

Research on lamellar structure and micro-hardness of directionally solidified Sn-58Bi eutectic alloy
by: Hu Xiaowu, et al.
Published: (2012-11-01)

The Effect of Rare Earth Addition on Microstructure and Mechanical Properties of the Rapidly Solidified Al-Si And Al-Si-Ni Alloys
by: D. Kapinos, et al.
Published: (2020-03-01)

Characteristics of the Growth of the Directionally Solidified Fe-4.25% C Eutectic Alloy
by: M. Trepczyńska-Łent
Published: (2021-12-01)

Removal of Tramp Elements within 7075 Alloy by Super-Gravity Aided Rheorefining Method
by: Lei Guo, et al.
Published: (2018-09-01)

Effect of Sr content on porosity formation in directionally solidified Al-12.3wt.%Si alloy
by: Liao Hengcheng, et al.
Published: (2014-09-01)

Zr addition-induced transitions of deformation mechanism at high temperatures of Nb-Si-Ti based multi-alloys: Super-dislocations in γ-Nb5Si3
by: Chengtong Ye, et al.
Published: (2022-10-01)

Influence of Minor Additions of Be on the Eutectic Modification of an Al-33wt.%Cu Alloy Solidified under Transient Conditions
by: Adilson Vitor Rodrigues, et al.
Published: (2023-01-01)

Effect of phosphor addition on eutectic solidification and microstructure of an Al-13%Si alloy
by: Liao Hengcheng, et al.
Published: (2011-11-01)

Flow Effect on Si Crystals and Mn-Phases in Hypereutectic and Eutectic Al-Si-Mn Alloys
by: Piotr Mikołajczak
Published: (2023-12-01)

Influence of Solidification Parameters on the Amount of Eutectic and Secondary Arm Spacing of Al–7wt% Si Alloy Solidified under Microgravity
by: András Roósz, et al.
Published: (2022-03-01)

Off-Eutectic Growth Model for Solidifying Alloy from an Undercooled State
by: Junfeng Xu, et al.
Published: (2023-09-01)

A CALPHAD thermodynamic model for multicomponent alloys under pressure and its application in pressurized solidified Al–Si–Mg alloys
by: Wang Yi, et al.
Published: (2024-06-01)

The roles of solidification cooling rate and (Mn,Cr) alloying elements in the modification of β-AlFeSi and hardness evolvements in near-eutectic Al-Si alloys
by: R. Kakitani, et al.
Published: (2023-03-01)

Influence of Al-B grain refiner on porosity formation of directionally solidified Al-Si alloys
by: Muhammet Uludağ
Published: (2020-09-01)

Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics
by: Huai-Hsun Lien, et al.
Published: (2020-08-01)

Primary Crystals of AlfeMnSi Intermetallics in the Cast AlSi Alloys
by: Warmuzek M.
Published: (2017-09-01)

Pore structure and mechanical properties of directionally solidified porous aluminum alloys
by: Komissarchuk Olga, et al.
Published: (2014-01-01)

The columnar to equiaxed transition of horizontal unsteady-state directionally solidified Al-Si alloys
by: Diego B. Carvalho, et al.
Published: (2014-02-01)

Effect of Rubidium on Solidification Parameters, Structure and Operational Characteristics of Eutectic Al-Si Alloy
by: Igor A. Petrov, et al.
Published: (2023-08-01)

Microstructure and mechanical behavior of the directionally solidified AlCoCrFeNi2.1 eutectic high-entropy alloy
by: M. Wischi, et al.
Published: (2022-09-01)

Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing
by: M. Rajabi, et al.
Published: (2015-07-01)

The influence of Si and V on the kinetics of phase transformation and microstructure of rapidly solidified Al-Fe-Zr alloys
by: Karpe B., et al.
Published: (2013-01-01)

Experimental Investigation of Ternary Al-Si-Cu Alloy Solidified with Unsteady-State Heat Flow Conditions
by: Luis Antônio de Souza Baptista, et al.
Published: (2018-03-01)

Solidification Simulation of Al-Si Alloys with Dendrite Tip Undercooling
by: Hongda Wang, et al.
Published: (2022-03-01)

Functions and mechanism of modification elements in eutectic solidification of Al-Si alloys: A brief review
by: Zu Fangqiu, et al.
Published: (2014-07-01)

Solidification and microstructural formation of a ternary eutectic Al-Cu-Si cast alloy
by: Samuel A. Awe
Published: (2021-12-01)

Review on Progress of Lamellar Orientation Control in Directionally Solidified TiAl Alloys
by: Han Liu, et al.
Published: (2023-07-01)

Effect of Soft Annealing Treatment on Impact Strength and Hardness of the EN AC-AlSi11 Alloy
by: Jarco A.
Published: (2017-09-01)

Solidified Structure Refinement of H13 Tool Steel under a Multi-Rotational Speed Super Gravity Field
by: Shao-Ying Li, et al.
Published: (2020-10-01)

Effects of cellular growth on fatigue life of directionally solidified hypoeutectic Al-Fe Alloys
by: Pryscilla Liberato Ribeiro, et al.
Published: (2014-02-01)

Phase Separation in Rapid Solidified Ag-rich Ag-Cu-Zr Alloys
by: Saisamorn Niyomsoan, et al.
Published: (2015-11-01)