| Summary: | This study analyzes the maximum load on the shaft construction with a diameter of 12 mm and a length of 581 mm. The shaft is designed as a shaft for cutting meat with a capacity of 5 kg. The analysis was performed using the finite element analysis method included in the Autodesk software. According to mathematical calculations, the shaft is considered safe because the value of the admissible tension τa = 7.380 kg / mm2 is greater than the maximum tension τp 5.62 kg / mm2. Based on the simulation results of the test, the shaft experiences a maximum off-stress of 61.89 MPa, a maximum displacement of 0.07715 mm, , and a safety factor of 3.34 µl so that the shaft is classified as safe for use with a Load capacity of 5 Kg
|
|---|