| Summary: | This research studied the use of CO<sub>2</sub> LASER microperforation as a pretreatment for the refractive window (RW) drying of apple slices with respect to total polyphenol content (TPC), antioxidant capacity, color Δ<i>E</i>, and product stability under accelerated storage. For this purpose, the processing variables assessed were pore size (200–600 µm), pore density (9–25 pores/cm<sup>2</sup>), and drying temperature (70–90 °C). As baseline criteria, a comparison with respect to the control without microperforations and samples subjected to conventional tunnel and lyophilization were also considered. The increase in the pore size from 200 to 600 µm resulted in shorter drying times (≤40 min), minimal change in color (Δ<i>E</i>) and loss of TPC, while DPPH was negatively affected by the combined effect of the pore density and the drying temperature. In general, the use of RW with CO<sub>2</sub> resulted in apples of higher quality than those obtained in conventional drying and comparable to those obtained through the use of freeze-drying. Finally, during accelerated storage, quality attributes decreased significantly for samples dried at 90 °C regardless of whether microperforations were used, suggesting that a compromise between drying temperature and pore size must be weighed to reduce processing time and to avoid further quality losses during storage.
|
|---|