Analysis and science-based compilation of the results of studying percussion-rotary underground slimhole digging
The relevance of the research is caused by the necessity of improving the engineering and technology of geological explorations and the energy and resource efficiency of drilling. The main aim of the research is to analyse and generalize research results obtained for the possible development and app...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | Russian |
| Published: |
Tomsk Polytechnic University
2019-05-01
|
| Series: | Известия Томского политехнического университета: Инжиниринг георесурсов |
| Subjects: | |
| Online Access: | http://izvestiya-tpu.ru/archive/article/view/1628 |
| Summary: | The relevance of the research is caused by the necessity of improving the engineering and technology of geological explorations and the energy and resource efficiency of drilling. The main aim of the research is to analyse and generalize research results obtained for the possible development and application of the resource-efficient drilling technology using the strain wave generator. The literature review of theoretical and experimental research was carried out in percussion drilling of small holes in medium-hard and harder rocks. To increase the penetration rate, the percussive mechanisms were designed. However, the increase of strain wave energy is reduced by the strength of the drilling tool. At constant hole diameter, the increased impact load should be transmitted over the drill string and their connections having the original size. These very elements of a drill string are the deterrents to implement a new technology. Methodology: theoretical analysis; a vast review of scientific literature on all problems of power pulse formation, strain wave transmission over the drill string, rock failure, appropriate modes of operation of percussion drilling, drilling optimization prior the engineering process, design techniques chosen for percussion drilling systems, work process modeling, energy parameter determination for drilling units, comparison of independent research results Findings. The paper introduces the modern ideas and achievements in the field of small hole percussion drilling. The authors have identified the causes of research results divergence. The expediency of carrying out the research to improve technological and engineering processes and drilling techniques was shown. The authors determined the main trends in researching drilling technology and engineering process and stated the recommendations for improving drilling effectiveness due to intensification of rock failure at well boring. |
|---|---|
| ISSN: | 2500-1019 2413-1830 |