| Summary: | AbstractThe load bearing structure of airplane called fuselage has to sustain the continuous explosive and implosive stresses generated during time of flight in addition to load of passengers, fuel, cargo and engines. Use of high specific strength materials for such fuselage structure greatly reduces the emissions generated by air vehicles. In the current study, experimental investigations into the processing of Graphene Nanoplatelets (GNPs) reinforced AA2024 metal matrix composites through the fusion of mechanical alloying and stir casting technique by varying the GNPs content from 0 to 2 wt.% with an interval of 0.5 wt.%. The use of micro sized particles of aluminum (75 µm) as launching vehicle helps to carry and launch the nanoreinforcement into molten metal that assists in a uniform distribution by means of mechanical alloying. This helps us in achieving an ultimate tensile strength of 203 MPa for the sample of 1.5 wt.% GNPs. Microstructural evidences from Field emission scanning electron microscopy (FESEM) confirms the uniform distribution of GNPs in the metal matrix. Moreover, FESEM analysis on the graphene pull-out area over fractured surface elucidates an improvement in wettability between the reinforcement and metal matrix. While the X-ray diffraction analysis on the casted samples confirms that the composites are free from major contaminations and intermetallic phases.
|
|---|