New Wear Resistant Iron-Base Matrix Materials For The Fabrication Of Sintered Diamond Tools
The possibility of the use of inexpensive iron-base powders in the production of sintered diamond tools is again explored. Ball-milled Fe-Ni-Cu-Sn-C and Fe-Mn-Cu-Sn-C powders were consolidated to a virtually pore-free condition by hot pressing at 900°C. The resultant materials are characterised by a...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Polish Academy of Sciences
2015-06-01
|
| Series: | Archives of Metallurgy and Materials |
| Subjects: | |
| Online Access: | http://www.degruyter.com/view/j/amm.2015.60.issue-2/amm-2015-0184/amm-2015-0184.xml?format=INT |
| Summary: | The possibility of the use of inexpensive iron-base powders in the production of sintered diamond tools is again explored. Ball-milled Fe-Ni-Cu-Sn-C and Fe-Mn-Cu-Sn-C powders were consolidated to a virtually pore-free condition by hot pressing at 900°C. The resultant materials are characterised by a combination of high Knoop hardness, 260-440 and yield strength, 780-1350 MPa, and resistance to abrasion. These properties can be significantly modified by changing the milling time. |
|---|---|
| ISSN: | 2300-1909 |