POSITION OF DIAMOND WIRE SAWING PLANT CAUSES CHANGES IN SAWING EFFICIENCY AT PERFORMING HORIZONTAL CUTS

POSITION OF DIAMOND WIRE SAWING PLANT CAUSES CHANGES IN SAWING EFFICIENCY AT PERFORMING HORIZONTAL CUTS

The paper discusses how the shape of sawing trajectory diamond wire influenced in sawing efficiency in excavation of dimension stone. The influence of sawing effect and life time of the diamond wire altering to the position of diamond wire sawing plant has experimentally tasted. It has been establi...

ver descrição completa

Detalhes bibliográficos
Principais autores:	Siniša Dunda, Siniša Štambuk
Formato:	Artigo
Idioma:	English
Publicado em:	University of Zagreb 1994-12-01
coleção:	Rudarsko-geološko-naftni Zbornik
Assuntos:	dimension stone quarrying diamond wire sawing plant
Acesso em linha:	http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=21041&lang=en

Registros relacionados

THE CONCENTRATION OF DIAMONDS INFLUENCES THE WEAR OF BEADS IN SAWING DIMENSION STONE WITH DIAMOND WIRE SAWING PLANT
por: Siniša Dunda
Publicado em: (1993-12-01)

FRICTION COEFFICIENT OF DIAMOND WIRE SAW
por: Siniša Dunda
Publicado em: (1998-12-01)

UNNIFORMITY OF MOTION TRANSMISSION OF A DIAMOND SAW WIRE CUTTER FOR THE EXPLOITATION OF DIMENSION STONE BLOCKS
por: Siniša Dunda
Publicado em: (1991-12-01)

THEORETICAL DEVELOPMENT OF THE ESTIMATE OF DIAMOND WIRE SAVING PLANT
por: Siniša Dunda
Publicado em: (1996-12-01)

THEORETICAL PROPOSITIONS FOR A TANDEM PULLEY DRIVE IN DIAMOND WIRE SAWING PLANT USED FOR DIMENSION STONE EXCAVATION
por: Siniša Dunda
Publicado em: (1992-12-01)

INFLUENCE OF THE CIRCULAR SAW DISC PERIPHERAL VELOCITY ON DIAMOND TOOL CONSUMPTION DURRING DIMENSION STONE CUTTING
por: Siniša Dunda
Publicado em: (1989-12-01)

TENSILE STRENGTH OF STEEL ROPES OF DIAMOND WIRE SAWS
por: Siniša Dunda, et al.
Publicado em: (2001-12-01)

EVALUATING THE SAWABILITY OF ROCKS BY CHAIN-SAW MACHINES USING THE PROMETHEE TECHNIQUE
por: Reza Mikaeil, et al.
Publicado em: (2021-01-01)

STRESSES AND DEFORMABILITY OF ROCK MASS UPON OPEN PIT EXPLOITATION OF DIMENSION STONE
por: Siniša Dunda, et al.
Publicado em: (2003-12-01)

RESEARCH PROGRESS ON CUTTING TECHNOLOGY OF SIC MONO-CRYSTAL WAFER WITH WIRE SAW
por: LI Lun, et al.
Publicado em: (2015-01-01)

Simulation study of cutting fluid flow field in kerf of fine diameter diamond wire saw
por: Jiahu CHEN, et al.
Publicado em: (2024-12-01)

A Systematic Review of Modeling and Simulation for Precision Diamond Wire Sawing of Monocrystalline Silicon
por: Ansheng Li, et al.
Publicado em: (2024-08-01)

AN INVESTIGATION OF THE EFFECT OF TOUGHNESS AND BRITTLENESS INDEXES ON AMPERE CONSUMPTION AND WEAR RATE OF A CIRCULAR DIAMOND SAW
por: Masoud Akhyani, et al.
Publicado em: (2018-01-01)

RANDOM FORCE MODELING AND VIBRATION ANALYSIS OF FIXED ABRASIVE WIRE SAW
por: JI LeiLei, et al.
Publicado em: (2019-01-01)

Silicon Extraction from a Diamond Wire Saw Silicon Slurry with Flotation and the Flotation Interface Behavior
por: Lin Zhu, et al.
Publicado em: (2024-12-01)

Review of Silicon Recovery from Diamond Wire Saw Silicon Powder Waste Based on Hydrometallurgical Process
por: Baoshan Xiong, et al.
Publicado em: (2024-11-01)

Mechanics of sawing : band and circular saws /
por: 4129 Forest Products Research Laboratory (Great Britain), et al.
Publicado em: (1954)

Saws and sawing /
por: 246009 Bradley, Ian
Publicado em: (1986)

Analysis of Wafer Warpage in Diamond Wire Saw Slicing Sapphire Crystal
por: Yihe Liu, et al.
Publicado em: (2024-08-01)

THE EFFECT OF GEOLOGICAL PROPERTIES OF DIMENSION STONES ON THE PREDICTION OF SPECIFIC ENERGY (SE) DURING DIAMOND WIRE CUTTING OPERATIONS
por: Mehrbod Khoshouei, et al.
Publicado em: (2020-01-01)

Chain saws
por: 8096 British Standards Institution

THE IMPACT OF AREA AND SHAPE OF TOOL CUT ON CHAIN SAW PERFORMANCE
por: Tomislav Korman, et al.
Publicado em: (2016-10-01)

Modern mechanical saw practice/
por: 187108 Foyster, J. Raymond
Publicado em: (1953)

Woodworking saws for hand use
por: 8096 British Standards Institution

Card clothing wire
por: 8096 British Standards Institution

Band saws [filem jalur]
Publicado em: (1980)

Circular saws for woodworking and their attachment
por: 8096 British Standards Institution

Chain saw service manual
Publicado em: (1974)

Terminology and designation of the profile shape of woodworking saw teeth
por: 8096 British Standards Institution
Publicado em: (1983)

Energy consumption modeling and parameter optimization of tower combined diamond circular saw blade
por: Anshun GUO, et al.
Publicado em: (2024-06-01)

Analysis and Testing of Pre-Cut Sugarcane Seed Stalk Sawing Performance Parameters
por: Bin Yan, et al.
Publicado em: (2024-06-01)

Specification for interchangeability dimensions of the drive of solid and segmental circular saws for cold cutting of metals : saw diameter range 224 mm to 2240 mm
por: 8096 British Standards Institution

MODELING OF THIN SAWS NOISE EMISSION
por: Arine A. Avakyan, et al.
Publicado em: (2011-07-01)

Small engines and chain saws : flat rate pricing guide
Publicado em: (1973)

Improved Life of Circular Saws Used in Primary Wood Processing
por: Maryam Torkghashghaei, et al.
Publicado em: (2023-01-01)

Woodworking : power saws [filem jalur]
Publicado em: (1978)

Interchange of Heat in Saw Disc Body During Cutting
por: Jan Svoren, et al.
Publicado em: (2019-03-01)

SAW sensor for Influenza A virus detection enabled with efficient surface functionalization
por: Jiang, Ying, et al.
Publicado em: (2016)

SAW FREE MOTION STUDY
por: Arine A. Avakyan, et al.
Publicado em: (2012-06-01)

Designation and multilingual nomenclature for diamond or cubic boron intride grinding wheels and saws
por: 8096 British Standards Institution