Effects of Hydrophobic Surface Patterning on Boiling Heat Transfer and Critical Heat Flux of Water at Atmospheric Pressure
The effects of hydrophilic/hydrophobic surface patterning on critical heat flux (CHF) and heat transfer coefficient (HTC) were studied using custom-engineered testing surfaces. Patterning was created over a sapphire substrate and tested in a pool boiling facility in MITs Reactor Hydraulics Laborator...
Huvudupphovsmän: | Coyle, Carolyn P., O'Hanley, Harrison F, Phillips, Bren Andrew, Buongiorno, Jacopo, McKrell, Thomas J. |
---|---|
Övriga upphovsmän: | Massachusetts Institute of Technology. Department of Mechanical Engineering |
Materialtyp: | Artikel |
Publicerad: |
ASME International
2018
|
Länkar: | http://hdl.handle.net/1721.1/117084 https://orcid.org/0000-0001-6298-3557 https://orcid.org/0000-0002-8115-5981 |
Liknande verk
-
Separate effects of surface roughness, wettability, and porosity on the boiling critical heat flux
av: O'Hanley, Harrison F., et al.
Publicerad: (2014) -
Separate effects of surface roughness, wettability and porosity on boiling heat transfer and critical heat flux and optimization of boiling surfaces
av: O'Hanley, Harrison Fagan
Publicerad: (2013) -
Effects of porous superhydrophilic surfaces on flow boiling critical heat flux in IVR accident scenarios
av: Atkhen, Kresna, et al.
Publicerad: (2017) -
An experimental study of bubble departure diameter in subcooled flow boiling including the effects of orientation angle, subcooling, mass flux, heat flux, and pressure
av: Sugrue, Rosemary M, et al.
Publicerad: (2017) -
Nano-engineering the boiling surface for optimal heat transfer rate and critical heat flux
av: Phillips, Bren Andrew
Publicerad: (2013)