ENERGY REQUIREMENT OF ALTERNATIVE TECHNOLOGIES FOR DESALINATING GROUNDWATER FOR IRRIGATION

Increased global water demand coupled with limited water resources has led to acute water shortage in many regions, significantly affecting a griculture, which is the world’s largest consumer of water. Groundwater resources are thus increasingly being used to meet irrigation requirements. However,...

Full description

Bibliographic Details
Main Authors: Nayar, Kishor Govind, Wright, Natasha Catherine, Thiel, Gregory P., Winter, Amos G., Lienhard, John H
Other Authors: MIT-SUTD Collaboration
Format: Article
Language:en_US
Published: The International Desalination Association 2019
Online Access:http://hdl.handle.net/1721.1/121015
https://orcid.org/0000-0002-0988-1057
https://orcid.org/0000-0003-3687-188X
https://orcid.org/0000-0002-4583-1057
https://orcid.org/0000-0002-4151-0889
https://orcid.org/0000-0002-2901-0638
Description
Summary:Increased global water demand coupled with limited water resources has led to acute water shortage in many regions, significantly affecting a griculture, which is the world’s largest consumer of water. Groundwater resources are thus increasingly being used to meet irrigation requirements. However, groundwater resources around the world tend to be saline ( 0.5 ≤ S ≤ 5 g/kg ) rquiring desalination before use. Furthermore, with decreasing water availability, demands for producing permeate from the feed at higher recoveries (>85%) is also increasing. In this work, a thermodynamic least work analysis for desalination and pumping ground water is developed first. Then, the actual energy required by high recovery desalination technologies such as brackish water reverse osmosis (RO), closed circuit reverse osmosis (CCRO) and electrodialysis reversal (EDR) are compared with the thermodynamic least work of desalination from 50-95% recovery. CCRO consumed the least energy until a recovery of 92% after which EDR consumed the least energy. While the energy required for RO and CCRO changed with recovery, EDR energy consumption remained approximately constant at 0.85 kWh/m³. Water table depth was also found to significantly contribute to the total energy consumed, with the power required to pump groundwater being comparable to the desalination power requirements at water table depths greater than 50 m. Thus, the choice of selection of desalination technologies is particularly crucial for water table depths less than 50 m.