Developing a Digital-to-Print Fabrication Pipeline for Multi-Color Photochromic 3D Printing
Stereolithography (SLA) and digital light processing (DLP) 3D printing are two common resin-based 3D printing processes. These printing processes work by projecting a light source onto specific areas of resin, thereby forming thin layers of plastic that eventually stack up to create solid objects. H...
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Thesis |
| Published: |
Massachusetts Institute of Technology
2022
|
| Online Access: | https://hdl.handle.net/1721.1/139246 |
| _version_ | 1811087738294763520 |
|---|---|
| author | Chen, Sabina W. |
| author2 | Mueller, Stefanie |
| author_facet | Mueller, Stefanie Chen, Sabina W. |
| author_sort | Chen, Sabina W. |
| collection | MIT |
| description | Stereolithography (SLA) and digital light processing (DLP) 3D printing are two common resin-based 3D printing processes. These printing processes work by projecting a light source onto specific areas of resin, thereby forming thin layers of plastic that eventually stack up to create solid objects. However, one limitation of SLA and DLP resin printing is that they typically only produce single-color prints because only one resin type can be used at a time. Therefore, we present a novel approach that enables multi-color resin printing using photochromic dyes. By combining DLP with photochromic materials, our end-to-end 3D printing fabrication pipeline can create multi-colored objects using only one type of resin-based material.
Instead of using a standard, single-color resin, our resin contains a mixture of photochromic inks that can change color when exposed to different wavelengths of light. By integrating photochromic materials into a UV curable resin, we can programmatically change the color of the resin depending on the type of RGB light projected. To build our 3D printing system, we modified an existing resin-based 3D printer to incorporate both a UV and visible light projection system. This enables us to control both the curing and coloring of an object separately. By saturating the dyes prior to printing, and then projecting combinations of RGB light onto each layer after it has been cured, we can color objects directly during the printing process.
In this thesis, we provide the implementation details and design decisions that went into building this integrated 3D printing infrastructure. We discuss the user interface, printer hardware, software implementation, and photochromic resin formulation. We also provide operational instructions and explanations for key design decisions of our system. Finally, we evaluate the capabilities of our photochromic resin and printer system, and propose topics for future work. |
| first_indexed | 2024-09-23T13:51:14Z |
| format | Thesis |
| id | mit-1721.1/139246 |
| institution | Massachusetts Institute of Technology |
| last_indexed | 2024-09-23T13:51:14Z |
| publishDate | 2022 |
| publisher | Massachusetts Institute of Technology |
| record_format | dspace |
| spelling | mit-1721.1/1392462022-01-15T03:24:57Z Developing a Digital-to-Print Fabrication Pipeline for Multi-Color Photochromic 3D Printing Chen, Sabina W. Mueller, Stefanie Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science Stereolithography (SLA) and digital light processing (DLP) 3D printing are two common resin-based 3D printing processes. These printing processes work by projecting a light source onto specific areas of resin, thereby forming thin layers of plastic that eventually stack up to create solid objects. However, one limitation of SLA and DLP resin printing is that they typically only produce single-color prints because only one resin type can be used at a time. Therefore, we present a novel approach that enables multi-color resin printing using photochromic dyes. By combining DLP with photochromic materials, our end-to-end 3D printing fabrication pipeline can create multi-colored objects using only one type of resin-based material. Instead of using a standard, single-color resin, our resin contains a mixture of photochromic inks that can change color when exposed to different wavelengths of light. By integrating photochromic materials into a UV curable resin, we can programmatically change the color of the resin depending on the type of RGB light projected. To build our 3D printing system, we modified an existing resin-based 3D printer to incorporate both a UV and visible light projection system. This enables us to control both the curing and coloring of an object separately. By saturating the dyes prior to printing, and then projecting combinations of RGB light onto each layer after it has been cured, we can color objects directly during the printing process. In this thesis, we provide the implementation details and design decisions that went into building this integrated 3D printing infrastructure. We discuss the user interface, printer hardware, software implementation, and photochromic resin formulation. We also provide operational instructions and explanations for key design decisions of our system. Finally, we evaluate the capabilities of our photochromic resin and printer system, and propose topics for future work. M.Eng. 2022-01-14T14:59:08Z 2022-01-14T14:59:08Z 2021-06 2021-06-17T20:13:01.752Z Thesis https://hdl.handle.net/1721.1/139246 In Copyright - Educational Use Permitted Copyright MIT http://rightsstatements.org/page/InC-EDU/1.0/ application/pdf Massachusetts Institute of Technology |
| spellingShingle | Chen, Sabina W. Developing a Digital-to-Print Fabrication Pipeline for Multi-Color Photochromic 3D Printing |
| title | Developing a Digital-to-Print Fabrication Pipeline for Multi-Color Photochromic 3D Printing |
| title_full | Developing a Digital-to-Print Fabrication Pipeline for Multi-Color Photochromic 3D Printing |
| title_fullStr | Developing a Digital-to-Print Fabrication Pipeline for Multi-Color Photochromic 3D Printing |
| title_full_unstemmed | Developing a Digital-to-Print Fabrication Pipeline for Multi-Color Photochromic 3D Printing |
| title_short | Developing a Digital-to-Print Fabrication Pipeline for Multi-Color Photochromic 3D Printing |
| title_sort | developing a digital to print fabrication pipeline for multi color photochromic 3d printing |
| url | https://hdl.handle.net/1721.1/139246 |
| work_keys_str_mv | AT chensabinaw developingadigitaltoprintfabricationpipelineformulticolorphotochromic3dprinting |