Experimental Investigation of Subcooled Flow Boiling and CHF at Prototypical Pressures of Light Water Reactors

Boiling crisis is an important phenomenon that affects the performance and safety of pressurized water reactors (PWRs). Accurate predictions of the boiling crisis are difficult to make because they require a clear understanding of the physical mechanisms leading to the boiling crisis combined with a...

Full description

Bibliographic Details
Main Author: Kossolapov, Artyom
Other Authors: Bucci, Matteo
Format: Thesis
Published: Massachusetts Institute of Technology 2023
Online Access:https://hdl.handle.net/1721.1/151891
https://orcid.org/0000-0003-4565-8423
_version_ 1826211459015639040
author Kossolapov, Artyom
author2 Bucci, Matteo
author_facet Bucci, Matteo
Kossolapov, Artyom
author_sort Kossolapov, Artyom
collection MIT
description Boiling crisis is an important phenomenon that affects the performance and safety of pressurized water reactors (PWRs). Accurate predictions of the boiling crisis are difficult to make because they require a clear understanding of the physical mechanisms leading to the boiling crisis combined with accurate models of nucleate flow boiling heat transfer. High-resolution, in situ experiments performed at prototypical pressures of light water reactors (LWRs) are needed in order to elucidate the phenomenon of the boiling crisis and to inform the development of boiling models suitable for LWRs. In the present Thesis, we developed a high-pressure flow boiling experiment together with a new phase detection technique, allowing us to investigate high pressure flow boiling with high spatial and temporal resolutions. We explored aspects of bubble departure, microlayer and triple contact line evaporation, boiling parameters (i.e. nucleation site density, bubble departure frequency, wait and growth times), heat flux partitioning and departure from nucleate boiling. The results reveal that in high pressure flow boiling bubbles depart by sliding immediately after nucleation, with no adhesion force holding a bubble in place. Drag, buoyancy and inertia were identified as the only forces governing bubble departure process. We demonstrated that bubble microlayer disappears entirely for pressures above 3 bar, with its disappearance explained by the decrease in bubble growth rate at higher pressures. The depletion of the microlayer was also analyzed, revealing that both thermal and hydrodynamic effects could be responsible for microlayer depletion process. The analysis of the triple contact line evaporation showed that it cannot account for more than 20% of the total heat flux removed by the boiling surface. Temporal boiling parameters (i.e. bubble departure frequency, wait and growth times) vary considerably between nucleation sites and nucleation events. The distribution of bubble departure frequency is particularly intriguing, since it not only exhibits a power-law, but also reveals an abundance of nucleation sites with extremely low departure frequencies (i.e. in the order of a few hertz). The analysis of the three major heat flux partitioning mechanisms (i.e. evaporation, forced convection and transient conduction) reveal that these mechanisms can only account for 40% to 60% of the total heat flux at the boiling surface, suggesting that either the modeling of these mechanisms does not accurately describe the realistic boiling scenario, or another heat transfer mechanism should be introduced to account for the missing heat flux.
first_indexed 2024-09-23T15:06:13Z
format Thesis
id mit-1721.1/151891
institution Massachusetts Institute of Technology
last_indexed 2024-09-23T15:06:13Z
publishDate 2023
publisher Massachusetts Institute of Technology
record_format dspace
spelling mit-1721.1/1518912023-08-24T03:10:58Z Experimental Investigation of Subcooled Flow Boiling and CHF at Prototypical Pressures of Light Water Reactors Kossolapov, Artyom Bucci, Matteo Massachusetts Institute of Technology. Department of Nuclear Science and Engineering Boiling crisis is an important phenomenon that affects the performance and safety of pressurized water reactors (PWRs). Accurate predictions of the boiling crisis are difficult to make because they require a clear understanding of the physical mechanisms leading to the boiling crisis combined with accurate models of nucleate flow boiling heat transfer. High-resolution, in situ experiments performed at prototypical pressures of light water reactors (LWRs) are needed in order to elucidate the phenomenon of the boiling crisis and to inform the development of boiling models suitable for LWRs. In the present Thesis, we developed a high-pressure flow boiling experiment together with a new phase detection technique, allowing us to investigate high pressure flow boiling with high spatial and temporal resolutions. We explored aspects of bubble departure, microlayer and triple contact line evaporation, boiling parameters (i.e. nucleation site density, bubble departure frequency, wait and growth times), heat flux partitioning and departure from nucleate boiling. The results reveal that in high pressure flow boiling bubbles depart by sliding immediately after nucleation, with no adhesion force holding a bubble in place. Drag, buoyancy and inertia were identified as the only forces governing bubble departure process. We demonstrated that bubble microlayer disappears entirely for pressures above 3 bar, with its disappearance explained by the decrease in bubble growth rate at higher pressures. The depletion of the microlayer was also analyzed, revealing that both thermal and hydrodynamic effects could be responsible for microlayer depletion process. The analysis of the triple contact line evaporation showed that it cannot account for more than 20% of the total heat flux removed by the boiling surface. Temporal boiling parameters (i.e. bubble departure frequency, wait and growth times) vary considerably between nucleation sites and nucleation events. The distribution of bubble departure frequency is particularly intriguing, since it not only exhibits a power-law, but also reveals an abundance of nucleation sites with extremely low departure frequencies (i.e. in the order of a few hertz). The analysis of the three major heat flux partitioning mechanisms (i.e. evaporation, forced convection and transient conduction) reveal that these mechanisms can only account for 40% to 60% of the total heat flux at the boiling surface, suggesting that either the modeling of these mechanisms does not accurately describe the realistic boiling scenario, or another heat transfer mechanism should be introduced to account for the missing heat flux. Ph.D. 2023-08-23T16:16:56Z 2023-08-23T16:16:56Z 2021-09 2023-08-11T14:58:46.804Z Thesis https://hdl.handle.net/1721.1/151891 https://orcid.org/0000-0003-4565-8423 In Copyright - Educational Use Permitted Copyright MIT http://rightsstatements.org/page/InC-EDU/1.0/ application/pdf Massachusetts Institute of Technology
spellingShingle Kossolapov, Artyom
Experimental Investigation of Subcooled Flow Boiling and CHF at Prototypical Pressures of Light Water Reactors
title Experimental Investigation of Subcooled Flow Boiling and CHF at Prototypical Pressures of Light Water Reactors
title_full Experimental Investigation of Subcooled Flow Boiling and CHF at Prototypical Pressures of Light Water Reactors
title_fullStr Experimental Investigation of Subcooled Flow Boiling and CHF at Prototypical Pressures of Light Water Reactors
title_full_unstemmed Experimental Investigation of Subcooled Flow Boiling and CHF at Prototypical Pressures of Light Water Reactors
title_short Experimental Investigation of Subcooled Flow Boiling and CHF at Prototypical Pressures of Light Water Reactors
title_sort experimental investigation of subcooled flow boiling and chf at prototypical pressures of light water reactors
url https://hdl.handle.net/1721.1/151891
https://orcid.org/0000-0003-4565-8423
work_keys_str_mv AT kossolapovartyom experimentalinvestigationofsubcooledflowboilingandchfatprototypicalpressuresoflightwaterreactors