A green approach for depolymerization of chitosan: applications in hydrogels

Abstract Chitooligosaccharides (COS) are depolymerized chains produced from the natural polymer chitosan and has been determined to exhibit improved biological activities, high solubility in neutral to slightly alkaline pH, because of the lower molecular weight (MW). This makes COS more...

Full description

Bibliographic Details
Main Authors: Tabassum, Nishat, Ahmed, Shoeb, Ittisaf, Mohammad M., Rakid-Ul-Haque, Md., Ali, M. A.
Other Authors: Massachusetts Institute of Technology. Department of Chemical Engineering
Format: Article
Language:English
Published: Springer Netherlands 2023
Online Access:https://hdl.handle.net/1721.1/152273
Description
Summary:Abstract Chitooligosaccharides (COS) are depolymerized chains produced from the natural polymer chitosan and has been determined to exhibit improved biological activities, high solubility in neutral to slightly alkaline pH, because of the lower molecular weight (MW). This makes COS more attractive in biomedical applications. However, earlier studies focused on depolymerization techniques that were either cumbersome or expensive. Here, a convenient two-stage, green synthesis approach was developed and optimized, where gamma irradiation and oxidative degradation with H2O2 were used to depolymerize chitosan to produce COS for biomedical applications. The gamma radiation dose level, H2O2 degradation reaction’s temperature, time and H2O2 concentration were varied to obtain the mildest combination of reaction conditions. The most optimum set of conditions (15 kGy, 25oC, overnight reaction with 2% H2O2) yielded COS that was soluble in physiological pH range (7–8.5). The COS had a MW of 12.8 ± 1.6 kDa (which was a 95% reduction in MW), a 62.3% degree of deacetylation, and a crystallinity index of 33%. A photopolymerized hydrogel using this COS cross-linked with polyethylene glycol diacrylate (PEGDA) and carboxymethyl cellulose (CMC) was also developed. The hydrogel exhibited high swelling ratio (6.44–10.24), a porous morphology, a compression modulus of 4.5 ± 2.7 kPa (similar to soft tissues), and more than 95% biocompatibility with mammalian cells. This newly developed COS hydrogel involves a simple and green approach for the production of COS and shows promise as a scaffold for artificial soft tissue.